Technical Program |
|
S1-O1-A - Ceramics for renewable and sustainable energy
|
|
||||
|
S1-O1-A-1 P00330 (11:10 - 11:30) |
[invited] Strategic surface engineering on a perovskite-based electrode for CO2 reduction | |
| Sang Won Lee, Seok Hee Lee, and Tae Ho Shin* (Korea Insititute of Ceramic Engineering & Technology) | ||
|
S1-O1-A-2 P00258 (11:30 - 11:45) |
Fe-Co-Nitrogen-doped Carbon (NC) High-Performance Cathode for Rechargeable Zinc-Air Batteries | |
| Mizuki Nanke, Jun Tae Song, Motonori Watanabe, Miki Inada, and Tatsumi Ishihara* (Kyushu University) | ||
|
S1-O1-A-3 P00178 (11:45 - 12:00) |
Enhanced High-Rate Performance of CSP-treated V2O5 Cathodesfor Lithium-Ion Batteries | |
| Seungmi Lee, Yoshifumi Kondo, Yasuyuki Kondo, Yeongjun Seo, Sung Hun Cho, Tomoyo Goto, and Yuki Yamada (The University of Osaka), Sanjay Mathur (University of Cologne), Tohru Sekino* (The University of Osaka) | ||
|
S1-O1-B - Ceramics for renewable and sustainable energy
|
|
||||
|
S1-O1-B-4 P00065 (13:20 - 13:40) |
[invited] Co-doping strategies for enhancing the electrochemical properties and sintering behavior of NASICON ceramic | |
| Il Seop Jang, Gunhee Park, and Jinyoung Chun* (Korea Institute of Ceramic Engineering and Technology (KICET)) | ||
|
S1-O1-B-5 P00163 (13:40 - 14:00) |
[invited] Fabrication and photocatalytic activity of Ba1-xSrxTiO3 tetragonal crystal from oxyhydroxide crystal as precursor | |
| Miki Inada*, Jun Tae Song, Motonori Watanabe, and Tatsumi Ishihara (Kyushu University) | ||
|
S1-O1-B-6 P00027 (14:00 - 14:20) |
[invited] Understanding Voltage Hysteresis in Li-Rich Cathodes | |
| Byunghoon Kim* (Sungkyunkwan University) | ||
|
S1-O1-B-7 P00037 (14:20 - 14:35) |
Analysis of Degradation Behavior at the Layered Cathode/Solid Electrolyte Interface in Sulfide-Based All-Solid-State Batteries | |
| Shunsuke Kobayashi*, Takeharu Kato, and Akihide Kuwabara (Japan Fine Ceramics Center) | ||
|
S1-O1-B-8 P00369 (14:35 - 14:50) |
Effect of Acid Treatment on Hydrothermally Etched Ti3C2Tx MXene for Enhanced Lithium-Ion Storage | |
| Galuh Sukmarani, Pipit Fitriani*, and Ferry Iskandar (Institut Teknologi Bandung) | ||
|
S1-O1-C - Ceramics for renewable and sustainable energy
|
|
||||
|
S1-O1-C-9 P00119 (15:00 - 15:20) |
[invited] Sustainable Electrification Technologies with Ceramic Materials | |
| Sang Joon Kim* (Chungnam National University) | ||
|
S1-O1-C-10 P00053 (15:20 - 15:40) |
[invited] Development of skutterudite-type thermoelectric materials using pressure-induced self-insertion reaction | |
| Chihiro Sekine*, Sora Okaki, Kouta Awaji, Amran Hossain, Keiki Takeda, Yukihiro Kawamura, and Hirotada Gotou (Muroran Institute of Technology) | ||
|
S1-O1-C-11 P00165 (15:40 - 16:00) |
[invited] Development of non-noble Ni metal-based (Yb1-xCox)2O3–δ catalysts for green H2 production via ammonia decomposition | |
| Byungseo Bae* (Yeongwol Industrial Promotion Agency) | ||
|
S1-O1-C-12 P00365 (16:00 - 16:20) |
[invited] Enhanced Thermoelectric Performance of SrTiO3 Ceramics with Exsolved Ni Nanoparticles | |
| Michitaka Ohtaki* (Kyushu University) | ||
|
S1-O1-D - Ceramics for renewable and sustainable energy
|
|
||||
|
S1-O1-D-13 P00376 (16:25 - 16:45) |
[invited] Modified Electrical Properties of Ceramics by Hydrogen Incorporation | |
| Yoshinobu Nakamura* (The University of Tokyo) | ||
|
S1-O1-D-14 P00135 (16:45 - 17:05) |
[invited] Development of non-noble metal-supported catalysts for methane decomposition with high sulfur resistance | |
| Sun Woog Kim* (KOREA INSTITUTE OF CERAMIC ENGINEERING & TECHNOLOGY) | ||
|
S1-O1-D-15 P00130 (17:05 - 17:25) |
[invited] Role of Octahedral Tilts in Ionic Conduction: A Combined First-Principles and Graph-Theory Approach | |
| Kazuki Shitara* (Japan Fine Ceramics Center) | ||
|
S1-O1-D-16 P00112 (17:25 - 17:45) |
[invited] Scalable and Flexible Li-Ion Conducting Film Using a Sacrificial Template for High-Voltage All-Solid-State Batteries | |
| Hyun Woo Kim* (Gyeongsang National University) | ||
|
S1-O1-D-17 P00039 (17:45 - 18:00) |
Enhancing Near-Infrared Shielding and Photocatalytic Properties of KxWO3/g-C3N4/rGO Nanocomposite using Physical Mixing and Solvothermal Method | |
| Vinda Puspasari, Qiuyu Jin, Ayahisa Okawa, Takuya Hasegawa, and Shu Yin* (Tohoku University) | ||
|
S1-O2-A - Ceramics for renewable and sustainable energy
|
|
||||
|
S1-O2-A-1 P00066 (09:50 - 10:10) |
[invited] Catalytic Oxidation of Glycerol to Hydroxypyruvic Acid over Zirconium-Tin Oxide Based Catalysts | |
| Naoyoshi Nunotani*, Kunimitsu Morita, Shinji Tamura, and Nobuhito Imanaka (Osaka University) | ||
|
S1-O2-A-2 P00235 (10:10 - 10:30) |
[invited] Hydride ion conductors with complex anions | |
| Sangryun Kim* (Gwangju Institute of Science and Technology) | ||
|
S1-O2-A-3 P00036 (10:30 - 10:50) |
[invited] Design of Chloride Ion Conductors with Open Borate Framework | |
| Yoshihiro Tsujimoto* (National Institute for Materials Science) | ||
|
S1-O2-A-4 P00316 (10:50 - 11:10) |
[invited] Recent Advances in High-Entropy Oxides for Protonic Ceramic Electrochemical Cells at KAIST | |
| Kang Taek Lee* (KAIST) | ||
|
S1-O2-A-5 P00019 (11:10 - 11:30) |
[invited] Ag+ Superionic Conductors Based on AgI and Silver Oxyacid Salts and Their Structural Features | |
| Yuta Matsushima*, Ryota Kawanago, Yuto Makino, Natsu Oishi, Mizuki Yamamoto, and Chisato Matsushita (Yamagata University), Shu Yin (Tohoku University) | ||
|
S1-O2-A-6 P00167 (11:30 - 11:45) |
Synergistic Template–Dopant Engineering for Pressureless, Low-Temperature Sintering of Li7La3Zr2O12 Solid Electrolyte | |
| Seung Hoon Chun, Jiwoo Kim, Nguyen Van Quan, Minseok Kim, and Sangbaek Park* (Chungnam National University) | ||
|
S1-O2-A-7 P00006 (11:45 - 12:00) |
Performance Enhancement Strategies for Copper Halide Perovskite–Polymer Composite Triboelectric Nanogenerators | |
| Swathi Ippili, Venkatraju Jella, and Soon-Gil Yoon* (Chungnam National University) | ||
|
S1-O2-A-8 P00063 (12:00 - 12:15) |
Interface Optimization for Low-Contact Resistance and High-Reliability between Bismuth Telluride and Metals in Thermoelectric Generation Devices | |
| Akihiro Katsura, Hinata Gohara, and Yukiko Hirose (Kyoto Institute of Technology), Micucci Daniele and Stefania Speccia (Politecnico di Torino), Eiji Iwase (Waseda University), Tohru Sugahara* (Kyoto Institute of Technology) | ||
|
S1-O2-B - Ceramics for renewable and sustainable energy
|
|
||||
|
S1-O2-B-9 P00062 (13:20 - 13:40) |
[invited] Understanding Interfacial Similarities between Electrolysis and Secondary Batteries for Mitigation of Air Electrode Delamination in SOECs | |
| Hyung-Tae Lim* (Changwon National University) | ||
|
S1-O2-B-10 P00057 (13:40 - 14:00) |
[invited] Low-Temperature Fuel Cells Using Free Standing Nanosheet Solid Electrolyte | |
| Shintaro Ida* (Kumamoto University) | ||
|
S1-O2-B-11 P00313 (14:00 - 14:20) |
[invited] Low-iridum based electrocatalysts and electrodes for high-performance polymer electrolyte membrane water electrolysis | |
| HyukSu Han* (Hanyang University), Byung-Hyun Kim (Hanyang University ERICA) | ||
|
S1-O2-B-12 P00256 (14:20 - 14:45) |
Tape Casting and Co-Sintering for Anode Metal Supported SOFCs using Thin LSGM Electrolyte Film | |
| Minhyung Kim, Motonori Watanabe, Jun Tae Song, Miki Inada, and Tatsumi Ishihara* (Kyushu University) | ||
|
S1-O2-C - Ceramics for renewable and sustainable energy
|
|
||||
|
S1-O2-C-13 P00002 (15:00 - 15:20) |
[invited] Dispersoid free strengthening of ion conductive ceramics | |
| Akira Kishimoto* (Okayama University) | ||
|
S1-O2-C-14 P00314 (15:20 - 15:40) |
[invited] Fluorine-free paraffin-based dry-film electrodes for sustainable and efficient battery manufacturing | |
| Jinsoo Kim* (Daegu Gyeongbuk Institute of Science and Technology (DGIST)) | ||
|
S1-O2-C-15 P00056 (15:40 - 16:00) |
[invited] Reverse Water Gas Shift Reaction over Perovskite-type Oxide Catalysts | |
| Hidenori Yahiro*, Narumi Iwasa, Masahiro Fujisaki, Hiroyuki Yamaura, and Syuhei Yamaguchi (Ehime University), Saburo Hosokawa (Kyoto Institute of Technology) | ||
|
S1-O2-C-16 P00024 (16:00 - 16:20) |
[invited] Selective ethanol detection using SmFeO3 p-type semiconductors | |
| Yoshiteru Itagaki* (Ehime University) | ||
|
S1-O2-D - Ceramics for renewable and sustainable energy
|
|
||||
|
S1-O2-D-17 P00156 (16:30 - 16:50) |
[invited] Tuning of Visible-light Responsive Peroxo-modified Titanate Nanotube for Enhancing Photochemical Functions | |
| Tohru Sekino*, Hiroya Yasunari, Yoshifumi Kondo, Do Hyung Han, Hisataka Nishida, Yeongjun Seo, and Sung Hun Cho (The University of Osaka), Tomoyo Goto (Nara Institute of Science and Technology) | ||
|
S1-O2-D-18 P00098 (16:50 - 17:05) |
Manufacturing and Characterization of γ-Fe₂O₃@SnO₂ Core-Shell Nanocomposites: The Influence of Hydroxyl Introduction Methods | |
| Ho Hyun Won, Se Hyun Kyung, and Gye Seok An* (Kyonggi University) | ||
|
S1-O2-D-19 P00046 (17:05 - 17:20) |
Revealing Dual Functionalities in an Ag3PO4-Based Composite: Pollutant Removal and Gas Sensing under Light Irradiation | |
| Rini Larasati, Ayahisa Okawa, Takuya Hasegawa, and Shu Yin* (Tohoku University) | ||
|
S1-O2-D-20 P00340 (17:20 - 17:40) |
Synergistic Surface-Functionalized Metal–Organic Polyhedra for Catalysis and Sustainable Energy Technologies | |
| Jayaramulu Kolleboyina* (Indian Institute of Technology Jammu) | ||
|
S1-P1 - Ceramics for renewable and sustainable energy
|
|
||||
|
S1-P1-1 P00371 |
Effect of Composition-Induced Perovskite–Carbon Interfacial Interactions on ORR/OER Activity and Reaction Mechanism in Lithium–Oxygen Batteries | |
| Yungyeong Seo, Tae Ho Shin, Seoyoon Shin, and Seokhee Lee* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S1-P1-2 P00367 |
Advanced Low-Temperature Fabrication of Ce(Gd,Yb,Bi)O₂ Buffer Layers with Copper sintering aids | |
| Hye Young Kim (Korea Institute of Ceramic Engineering and Technology), Younki Lee (Gyeongsang National University), Tae Ho Shin* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S1-P1-3 P00362 |
Dopant-derived synergistic effect for enhancement of electrocatalytic nitrogen reduction reaction | |
| Uk Jung Kang and Dong yeon Kim* (Jeonbuk National University) | ||
|
S1-P1-4 P00352 |
Investigation of Ultrasonic Spray-Based Electrode Coating Process for Solid Oxide Fuel Cell Applications | |
| Jeongbin Lee and Seokhee Lee* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S1-P1-5 P00339 |
Ultrasonic Spray-Based Strategy for Performance Enhancement of SOEC Electrodes | |
| Gyuwon Kang and Seokhee Lee* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S1-P1-6 P00327 |
Analysis of Oxygen Vacancy Dynamics in SOEC Electrodes: A Strategy for Enhanced Stability | |
| Jinsil Lee (Korea Institute of Ceramic Engineering and Technology), Taeyun Kim (Gwangju Institute of Science and Technology), Tae Ho Shin (Korea Institute of Ceramic Engineering and Technology), Jong Hoon Joo* (Gwangju Institute of Science and Technology) | ||
|
S1-P1-7 P00311 |
Template-Assisted Design of Porous Metal Chalcogenide–Graphene Oxide Composite Nanostructures for Enhanced Lithium Storage | |
| Hwa Young Choi (Ajou university), Jin Hyeong Lee and Jin-Sung Park* (Ajou University) | ||
|
S1-P1-8 P00310 |
Encapsulation of Metal-Doped Metal Selenide Nanoparticles in Hollow Carbon Nanospheres for Use as Anode in Sodium-Ion Batteries | |
| Seul Jeong (Ajou university), Jin Hyeong Lee (Ajou University), Ji Myeon Park (Department of Energy Systems Research Ajou University), Jin Sung Park* (Ajou university) | ||
|
S1-P1-9 P00309 |
Enhancing the Electrochemical Performance of Lithium-Ion Batteries via the Design of Yolk-Shell Structured Sn/Sn-Chalcogenide@Carbon Composites | |
| Jin Hyeong Lee (Ajou University), Seul Jeong and Ji Myeon Park (Ajou university), Jin-Sung Park* (Ajou University) | ||
|
S1-P1-10 P00306 |
Aerosol-Assisted Synthesis of Three-Dimensional Carbon-Composited Metal Sulfide Microspheres with Numerous Empty Nanorooms for High Capacity Sodium-Ion Batteries | |
| Ji Myeon Park and Seul Jeong (Ajou university), Jin Hyeong Lee and Jin Sung Park* (Ajou University) | ||
|
S1-P1-11 P00291 |
Investigation of a high-Efficiency CO₂ Electrolysis System Using Large-Area LSGM Electrolyte-Supported Cell | |
| Jae Hoon Lim (Korea Institute of Ceramic Engineering and Technology), Byunghoon Kim (Sungkyunkwan University), Tae Ho Shin* (Korea Institute of Ceramic Engineering and Technology), Jong Hoon Joo (Gwangju Institute of Science and Technology) | ||
|
S1-P1-12 P00289 |
Dual Role of Fe₂O₃ in Photonic Sintering of LLZTO Garnet Solid Electrolytes | |
| SeonHo Jeong and Jin-Ho Kim* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S1-P1-13 P00377 |
High-Entropy Multi-Element Doping of LLZO for Structural Stabilization and Enhanced Lithium-Ion Transport | |
| Gyuri Lee and Haejin Hwang* (Inha University) | ||
|
S1-P1-14 P00375 |
Synthesis of Ni-Al Layered Double Hydroxides for Catalysts in Solid Oxide Cells (SOCs) | |
| Gyui Ham and Kyungsun Kim (Inha University), HyunJoo Yang (Aerogelix Inc.), Haejin Hwang* (Inha University) | ||
|
S1-P2 - Ceramics for renewable and sustainable energy
|
|
||||
|
S1-P2-1 P00176 |
Creation of Functional Materials from End-of-Life Vehicles Waste Glass | |
| Hiroshi Mitsuyasu, Toshihiro Kuzuya*, and Subaru Sasaki (Muroran Institute of Technology), Tatsumi Naganuma and Hisayoshi Matsushima (Hokkaido University) | ||
|
S1-P2-2 P00050 |
Flux Crystal Growth of New Layered Titanium Oxysulfides | |
| Yuan Hongbo, Tsujimoto Yoshihiro*, Matsushita Yoshitaka, Yamaura Kazunari, and Meng Yu (National Institute for Materials Science) | ||
|
S1-P2-3 P00287 |
Improved ash alkali behavior and Slagging Reduction in Bagasse Co-Combustion by Aluminosilicate-Mediated Alkali Transformation | |
| Jiyeon Park and Sangheon Lee (Korea Institute of Ceramic Engineering and Technology), Byoung-In Sang (Hanyang University), Jinhyung Lee* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S1-P2-4 P00277 |
Ammonia-fueled SOFCs with an ScSZ electrolyte: A comparative study of electrode materials | |
| Yeonseo Jung (Korea Institute of Ceramic Engineering and Technology), Byunghoon Kim (Sungkyunkwan University), Tae Ho Shin* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S1-P2-5 P00255 |
Optimization of Cathode and Interlayer Design for Enhanced Chromium Resistance in Protonic Ceramic Cells | |
| Park Dohyun (UST), Yang Sungeun* (Korea Institute of Science and Technology) | ||
|
S1-P2-6 P00244 |
Synergistic Dual-Layer Artificial SEI for High-Stabilized Lithium Metal Batteries | |
| Jiwoo Kim, Mee-Ree Kim, and Sangbaek Park* (Chungnam National University) | ||
|
S1-P2-7 P00237 |
Tailoring LiF Nano-Architecture for Uniform Lithium Plating in Anode-Free Batteries | |
| Jiwoo Kim, Mee-Ree Kim, Seung Hoon Chun, Nguyen Van Quan, Minseok Kim, and Sangbaek Park* (Chungnam National University) | ||
|
S1-P2-8 P00223 |
Eco-Friendly Laser-Irradiated Coffee Waste Carbons for Lithium-Ion Battery Anodes | |
| Si Eun Park (Chungnam National University), Tongmei Jing (China University of Petroleum (East China)), Hanku Nam and Sang Baek Park* (Chungnam National University), Young Jin Kim (Korea Advanced Institute of Science and Technology) | ||
|
S1-P2-9 P00202 |
Application of a Mixed Ionic Electronic Conductive Layer for Enhanced Solid-State Lithium Metal Batteries Performances | |
| Hwanuk Yeo, Suk Ho Hwang, and Dong-Wan Kim* (Korea University) | ||
|
S1-P2-10 P00201 |
Electronically Modulated Ru Electrocatalysts on Fiber Supports for Acidic Hydrogen Evolution Reaction | |
| Kyunggyu Kim, Kyounghoon Jung, and Dong-Wan Kim* (Korea University) | ||
|
S1-P2-11 P00198 |
Pathway-Controlled Synthesis of an Air-Stable, Dual-Cation-Substituted Argyrodite Solid Electrolytes | |
| Suk Ho Hwang, Dong-Wan Kim*, and Hwanuk Yeo (Korea University) | ||
|
S1-P2-12 P00144 |
Enhancement of Triboelectric Performance via Optimized LDH and PVDF-TrFE Concentration on RF-Sputtered AZO Films | |
| Eun Hye Hwang, Swathi Ippili, and Soon-Gil Yoon* (Chungnam National University) | ||
|
S1-P2-13 P00133 |
Hierarchical NiFe-LDH/GO/Ni3S2 Architectures on Ni Foam Delivering Superior OER Performance | |
| JeongHo Ryu* (Korea National University of Transportation) | ||
|
S2-O1-A - Electroceramics and application
|
|
||||
|
S2-O1-A-1 P00194 (11:10 - 11:30) |
[Invited] Encapsulation of anion and cation species in ceramic material by valence control of cage-structured crystal 12CaO∙7Al2O3 | |
| Naonori Sakamoto*, Jagadeeswaran Kondayampalayam Senthilkumar, Kyosuke Ban, Shuto Suzuki, and Takahiko Kawaguchi (Shizuoka University), Naoki Wakiya (Shizuoka Univesity) | ||
|
S2-O1-A-2 P00026 (11:30 - 11:45) |
Stability and Plasticity Engineering in 2D Sn/Ge Perovskites for Artificial Vision | |
| Soo-Yeon Yang and HyoJung Kim* (Sejong University) | ||
|
S2-O1-A-3 P00087 (11:45 - 12:00) |
Sensing Properties of MoOx/Graphene Hybrid Field Effect Transistor Gas Sensor Devices | |
| Otoya Okanishi, Akihiro Katsura, and Yukiko Hirose (Kyoto Institute of Technology), Naoka Nagamura (National Institute for Materials Science), Takao Ono and Takafumi Uemura (The University of Osaka), Tohru Sugahara* (Kyoto Institute of Technology) | ||
|
S2-O1-B - Electroceramics and application
|
|
||||
|
S2-O1-B-1 P00322 (13:30 - 13:50) |
[Invited] Stochastic Charge Trapping in SnS2 Mem-Transistors: An Intrinsic Gaussian Error Generation for Post-Quantum Cryptography | |
| Moon Seok Kim* (Chungnam National University), Sungho Kim (Ewha Womans University) | ||
|
S2-O1-B-2 P00193 (13:50 - 14:10) |
[Invited] Plasmonically Enhanced Faraday Effect in ZnFe2O4 Thin Films Deposited on Al Nanoarray Structures | |
| Seisuke Nakashima* (Shizuoka University) | ||
|
S2-O1-B-3 P00126 (14:10 - 14:30) |
[Invited] Feasible High-k Dielectric Layers for DRAM capacitors based on Morphotropic Phase Boundary | |
| Taehwan Moon* (Ajou University) | ||
|
S2-O1-B-4 P00083 (14:30 - 14:45) |
Mechanistic Study of Interface Engineering for Enhanced Catalytic Performance in Fe3O4@RuO2 Core-Shell Nanoparticles | |
| Jeong Min Lee (Kyonggi University), Su Ah Han and Gye Seok An* (University) | ||
|
S2-O1-C - Electroceramics and application
|
|
||||
|
S2-O1-C-1 P00187 (15:00 - 15:20) |
[Invited] Effect of the cation-deficiency and strain on the luminescent properties of Mn2+-doped spinel thin films | |
| Takuro Dazai* (Tokyo University of Science) | ||
|
S2-O1-C-2 P00290 (15:20 - 15:40) |
[Invited] Searching for optimal composition in multi-component functional materials via Bayesian active learning | |
| Min Young Ha* (Kyung Hee University) | ||
|
S2-O1-C-3 P00186 (15:40 - 16:00) |
[Invited] Magnetic properties of Mn3(Ge,Mn)N thin films grown by PLD | |
| Takahiko Kawaguchi*, Satoki Sugiura, Naonori Sakamoto, and Naoki Wakiya (Shizuoka University) | ||
|
S2-O1-C-4 P00014 (16:00 - 16:15) |
Predictive Modeling of Spanish Biomass Heating Value Using Optimized Neural Network Architectures and Analytical Models | |
| Anbarasan Jayapal* (Gyeongsang National University) | ||
|
S2-O1-D - Electroceramics and application
|
|
||||
|
S2-O1-D-1 P00267 (16:30 - 16:50) |
[Invited] Lead-Free Ferroelectric and MXene-Based Energy Harvesters for Wearable Microgrid Systems | |
| Kyeong Nam Kim* (Chungnam National University) | ||
|
S2-O1-D-2 P00184 (16:50 - 17:10) |
[Invited] Triclinic antiferroelectric titanite-type oxide PbTiGeO5 | |
| Taro Kuwano* (Institute of Science Tokyo) | ||
|
S2-O1-D-3 P00281 (17:10 - 17:30) |
[Invited] Intermittent Operation Scheme Based on Threshold Switching Memristor for Triboelectric Nanogenerator | |
| Seung-Bae Jeon* (Hanbat National University) | ||
|
S2-O2-A - Electroceramics and application
|
|
||||
|
S2-O2-A-1 P00348 (10:30 - 10:50) |
[Invited] Metal-insulator transition of VO2 thin film on glass substrate with CdxMg1-xO buffer layer | |
| Naoki Wakiya*, Sota Totsuka, Takahiko Kawaguchi, and Naonori Sakamoto (Shizuoka University) | ||
|
S2-O2-A-2 P00175 (10:50 - 11:10) |
[Invited] Regenerable platform for ultrafast capture of Perfluorooctanoic acid by CuAl layered double hydroxide | |
| Keon-Han Kim* (Pukyong National University) | ||
|
S2-O2-A-3 P00172 (11:10 - 11:30) |
[Invited] Intrinsic and Extrinsic Electro-Optic Properties in Ferroelectric Pb(Zr,Ti)O3 Thin Films | |
| Shinya Kondo* and Tomoaki Yamada (Nagoya University) | ||
|
S2-O2-A-4 P00142 (11:30 - 11:45) |
Tailoring Oxygen-Defect Chemistry in Ti3C2Tx MXene via TiO2-Based Carbothermal Route for Enhanced Electrical and EMI Shielding Properties | |
| Hyerim Kim and Joohyun Lim* (Kangwon National University) | ||
|
S2-O2-A-5 P00069 (11:45 - 12:00) |
Halide Perovskite-Based ReRAM with Enhanced Reliability and Wafer-Scale Scalability via ETL Engineering and Quasi-2D Design | |
| Geon Kim and HyoJung Kim* (Sejong University) | ||
|
S2-O2-B - Electroceramics and application
|
|
||||
|
S2-O2-B-1 P00132 (13:30 - 13:50) |
[Invited] Bi2SiO5-Based Dielectric Materials for Class-I Ceramic Capacitors | |
| Manabu Hagiwara* and Yoji Yasumoto (Keio University), Hiroki Taniguchi (Nagoya University), Shinobu Fujihara (Keio University) | ||
|
S2-O2-B-2 P00018 (13:50 - 14:10) |
[Invited] Dimensional Scaling of Topological Transition Metal Phosphides for Advanced Interconnect | |
| Gangtae Jin* (Gachon University) | ||
|
S2-O2-B-3 P00120 (14:10 - 14:30) |
[Invited] Low-Resistance Ohmic Contacts: A Strategy for Ideal 2D Semiconductor Transistors | |
| TaeWan Kim* (University of Seoul) | ||
|
S2-O2-B-4 P00042 (14:30 - 14:45) |
Copper-based Cs3Cu2I5 Perovskite Films for Stable and High-Performance UV Self-Powered Photodetectors via CVD | |
| Hoang Van Vuong and Gil Soon Yoon* (Chungnam National University) | ||
|
S2-O2-C - Electroceramics and application
|
|
||||
|
S2-O2-C-1 P00269 (15:00 - 15:20) |
[Invited] Crystallographically Textured BiScO3-PbTiO3 Ceramics for High-temperature Piezoelectric Energy Harvesting Applications | |
| Min-seon Lee (Korea Institute of Ceramic Enginnering&Technology), Young Hun Jeong* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S2-O2-C-2 P00079 (15:20 - 15:40) |
[Invited] Enhanced Poling and High-Temperature Properties of Sol–Gel Composite Piezoelectric Thick Films Using a TiO2–SrCO3 Matrix | |
| Makiko Kobayashi*, Mako Nakamura, and Kei Nakatsuma (Kumamoto University) | ||
|
S2-O2-C-3 P00008 (15:40 - 15:55) |
2차원 HfS 2 의 저항 스위칭 특성에 대한 DFT 기반 분석 | |
| Dong-Won Kwon* (Gyeongsang National University) | ||
|
S2-O2-C-4 P00064 (15:55 - 16:10) |
Hybridization of Laser-Induced Graphene and Nanostructured Molybdenum Trioxide with Metal-Organic Decomposition for Gas Sensing | |
| Akihiro Katsura*, Otoya Okanishi, Yukiko Hirose, Yuma Miura, Wenliang Zhu, and Tohru Sugahara (Kyoto Institute of Technology) | ||
|
S2-O2-D - Electroceramics and application
|
|
||||
|
S2-O2-D-1 P00022 (16:30 - 16:50) |
[Invited] Rational Design of Ferroelectric Ceramics through Cation Disorder Engineering in Layered Perovskite Oxides | |
| Wei Yi*, Tatsushi Kawasaki, Takumi Terauchi, and Yang Zhang (Kyoto University), Hirofumi Akamatsu (Kyushu University), Ryo Ota (3Hokkaido University), Shuki Torii (High Energy Accelerator Research Organization (KEK)), Koji Fujita (Kyoto University) | ||
|
S2-O2-D-2 P00128 (16:50 - 17:10) |
[Invited] Ceramic Nanofillers-Incorporated Liquid Metal Thermal Grease as High-Performance Thermal Interface Material | |
| Sungjune Park* (Sungkyunkwan University) | ||
|
S2-O2-D-3 P00320 (17:10 - 17:25) |
Fabrication of ZnO/rGO Films via Spray deposition techniques for Low temperature operable NOx gas sensing system Integrated with Electrochromic Visualization | |
| Sungjun Choi, Jiseon Kim, Minseok Kim, and Jungwon Oh (Hanyang University), Caroline Sunyong Lee* (Hanyang University, ERICA campus) | ||
|
S2-O2-D-4 P00373 (17:25 - 17:40) |
Investigation of vibration transmission for enhancing sensitivity of haptic devices | |
| Oeun Kwon and Chang-Jun Bae* (KIMS), Honghee Kim, Kwanghyun Chung, and Sang-Han Bae (Kyungwon Industry), Soo Min Kim and SangWook Han (KATECH) | ||
|
S2-P1 - Electroceramics and application
|
|
||||
|
S2-P1-1 P00370 |
Electrostrictive Properties of Zr-doped CeO2 Ceramics | |
| Kohei Iwasaki, Shinya Kondo, and Tomoaki Yamada* (Nagoya University) | ||
|
S2-P1-2 P00055 |
Synthesis of iron nitride with high saturation magnetization by mechanical alloying | |
| Yumi Morii, Yuji Masubuchi*, and Akira Miura (Hokkaido University) | ||
|
S2-P1-3 P00308 |
Low Temperature Sintering and Interface Control of Composite Dielectrics for Microwave Applications | |
| Nayeon Kwon and Junwon Lee (Korea Aerospace University), Tae Yeong Song (Koreaerospace University), Do-Kyun Kwon* (Korea Aerospace University) | ||
|
S2-P1-4 P00295 |
Effect of Hot Isostatic Pressing Parameters on the Transmittance of CVD-ZnS in the Visible Wavelength | |
| Joonyoung Park, Jaehwan Hwang, Karam Han, Soyoung Kim, Jung Hwan In, Seon Hoon Kim, and Ju Hyeon Choi* (Korea Photonics Technology Institute) | ||
|
S2-P1-5 P00276 |
Nanosheet Wrapping Strategy for BaTiO₃ Ceramics: Toward High-Performance MLCCs | |
| Junwon Lee (Korea Aerospace University), Tae Yeong Song (Koreaerospace University), Do-Kyun Kwon* (Korea aerospace University) | ||
|
S2-P1-6 P00274 |
Two-Step Sintering-Assisted Core–Shell Stabilization in BaTiO₃ for Non-Rare-Earth MLCC Dielectrics | |
| Tae Yeong Song, Junwoon Lee*, and Do-Kyun Kwon (Koreaerospace University) | ||
|
S2-P1-7 P00071 |
Temperature Stability of ReRAM Devices for using Electron Transport Layer and Enhanced Switching Performance | |
| HyoJung Kim* and Yong Hyun Kim (Sejong University) | ||
|
S2-P1-8 P00068 |
Advancing Halide Perovskite Resistive Memory Stability through TPBI Electron Transport Layer | |
| Wonseop Shin and HyoJung Kim* (Sejong University) | ||
|
S2-P1-9 P00259 |
Optimizing Photoluminescence of Perovskite-Ceramic Composite Films via Aerosol Deposition with Varying PTFE Content | |
| Won-Il Ahn and Seok-Hun Kim (Kwangwoon University), Sunghoon Kim (Dong-Eui University), Jong-Min Oh* (Kwangwoon University) | ||
|
S2-P1-10 P00246 |
Stable Energy Harvesting of a Broadband Magneto-Mechano-Electric Generator via Self-Resonance Tuning under Variable Temperature Conditions | |
| Hyunseok Song (Korea University), Jungho Ryu (Yeungnam University), Hyun-Cheol Song* (Korea University) | ||
|
S2-P1-11 P00225 |
Liquid Metal–Ga(FSI)₃ Core–Shell Interlayer for Anode-Free All Solid-State Batteries | |
| Jimin Kwon, Do Hun Kim, and Sangbaek Park* (Chungnam National University) | ||
|
S2-P1-12 P00181 |
Scalable synthesis of single-phase Fe4N via de-nitridation method | |
| Hyojin Choi, Hyunwoo Seo, Hojeong Kim, Wooyoung Lee, Seung Yong Lee, and Kyu Hyoung Lee* (Yonsei University) | ||
|
S2-P1-13 P00180 |
High performance hydrogen sensing material operating at room temperature: Mn-doped TiOx nanosheets | |
| Sol Han, Jeong Yun Hwang, and Kyu Hyung Lee* (Yonsei University) | ||
|
S2-P1-14 P00154 |
Mitigating PTFE Decomposition and Enhancing Energy Density in Lithium-Ion Batteries Using Dry-Processed Anodes with FEC-Derived SEI | |
| Seungmin Han and Taeseup Song (Hanyang university), Junghyun Choi* (Gachon University) | ||
|
S2-P1-15 P00152 |
Tailoring electrolyte additives to stabilize dry-processed anodes and extend full-cell lifespan | |
| Woojin Jeong and Taeseup Song (Hanyang University), Junghyun Choi* (Gachon University) | ||
|
S2-P1-16 P00114 |
Optimizing ZnO–CeO₂ Compositions for Enhanced VOC Adsorption | |
| Jeongho Lee, Min Young Kim, Seung Yong Lee, and Kyu Hyoung Lee* (Yonsei University) | ||
|
S2-P1-17 P00010 |
High-k BZNO/ Al2O3 /Ti Multilayer Structures Deposited by Magnetron Sputtering for Low-Leakage Dielectric Applications | |
| JoongHo Park* (Gyeongsang National University) | ||
|
S2-P1-18 P00009 |
Dielectric Thin Film Properties of Co-Sputtered BZNO/TiO2 for Capacitor Applications | |
| Younho Choi* (Gyeongsang national university) | ||
|
S2-P2 - Electroceramics and application
|
|
||||
|
S2-P2-1 P00137 |
A research and analysis of BT-based MLCC as a function of temperature | |
| Tae Soo Yeo and Wook Jo* (Ulsan National Institute of Science and Technology) | ||
|
S2-P2-2 P00109 |
Piezoelectric Energy Harvesting of Amorphous Pb(Zr,Ti)O3 Thin Films | |
| Sung Min Her* and Ju Han (Yonsei University), Da Bin Kim (Incheon National University), Hyojoo Kang, Seo Young Moon, and Yong Soo Cho (Yonsei University) | ||
|
S2-P2-3 P00090 |
Non-Resonant Piezoelectric Energy Harvesting of PZT-based Tape Cantilevers | |
| Kwan Sik Park*, Byeong Kon Kim, Kyeong Su Jo, Sang Heon Kim, Seok Mo Yang, and Yong Soo Cho (Yonsei University) | ||
|
S2-P2-4 P00272 |
Fabrication of Metastable 2D CaxHyGa₂As₂ via Proton Exchange and Its Application in Memristors | |
| Gaeun Lee, Jong-Young Kim*, and Sung Kyoon Ko (Korea Institute of Ceramic Engineering and Technology), Wooyoung Shim, Jongbum Won, and Sijin Jeon (Yonsei University), Mingyeong Lee (Korea Institute of Ceramic Engineering & Technology(KICET)) | ||
|
S2-P2-5 P00266 |
Diamond Nucleation on an Al2O3-SiC Template for Heterogeneous Growth of Diamond | |
| Hoang-Linh Nguyen, Gi-Yeol Woo, Nhat-Minh Phung, Tae-Yong Park, Yun-Ji Shin, and Seong Min Jeong* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S2-P2-6 P00015 |
Effect of BZNO/TiO₂ Multilayer Structure on the Dielectric and Electrical Properties of BZNO Thin Films | |
| ByeongJin Moon* (Gyeongsang National University) | ||
|
S2-P2-7 P00013 |
Preliminary Study on the Deposition and Dielectric Characterization of BZNO/Al₂O₃ Multilayer Thin Films via RF Magnetron Sputtering | |
| Ju Hyun Park* (Gyeongsang National University) | ||
|
S2-P2-8 P00012 |
Fabrication and Characterization of BZNO-Al2O3 Composite Dielectric Thin Film via Co-Sputtering | |
| Minseo Jang* (Gyeongsang National University) | ||
|
S2-P2-9 P00011 |
Dielectric Characterization of Sputter-Deposited BZNO-Ti Multilayer Nanofilms | |
| Hyeonchae Im* (Gyeongsang National University) | ||
|
S2-P2-10 P00136 |
F-doped coatings for stable Ni-rich cathodes in high-voltage liquid electrolyte based Li-ion batteries | |
| Yu Onodera, Jeevan Kumar Padarti, Shigeto Hirai, and Tomoya Ohno* (Kitami Institute of Technology) | ||
|
S2-P2-11 P00101 |
UV induced hydrophilic surface modification of graphite anode particles for water based protective coating | |
| Kota Takeuchi, Jeevan Kumar Padarti, Shigeto Hirai, and Tomoya Ohno* (Kitami Institute of Technology) | ||
|
S2-P2-12 P00332 |
Moisture Stability Assessment and Barrier Effect Validation of LATP Solid Electrolyte via PALD-Coated Al₂O₃ Layer | |
| hyungik Choi (Korea University), Yoonsoo Han* (Korea Institute of Ceramic Engineering Center) | ||
|
S2-P2-13 P00331 |
Effect of Crystallinity on Via Hole Characteristics in Photosensitive Glass for TGV | |
| YongJun Seo* (Semiconductor Solution Center / Korea Institute of Ceramic Engineering & Technology (KICET)), Yoonsoo Han (Korea Institute of Ceramic Engineering & Technology (KICET)) | ||
|
S2-P2-14 P00381 |
Carbon-Based PTC Heating Textiles on Meta-Aramid Substrates for Electric Vehicle Applications | |
| Ji Hyeok Choi (Gachon University), Seung Hyun Jee (Mcell Co., Ltd.), Sun Hee Kim* (Incheon National University) | ||
|
S2-P2-15 P00380 |
High-Stretch Positive-Temperature-Coefficient Surface-Heating Textile via PTC–MWCNT Architectures: Fast Start-Up, Self-Limiting Thermal Plateaus, and Fatigue-Resilient Operation | |
| Ji Hyeok Choi (Gachon University), Seung Hyun Jee (Mcell Co., Ltd), Sun Hee Kim* (Incheon National University) | ||
|
S3-O1-A - Engineering Ceramics
|
|
||||
|
S3-O1-A-1 P00216 (11:10 - 11:30) |
[Invited] Formation and Evolution of Complex Pores from Heterogeneities during Sintering of High-Purity Submicron Alumina | |
| Gaku Okuma* (National Institute for Materials Science (NIMS)), Tsukasa Shimizugawa and Shingo Ozaki (Yokohama National University), Toshio Osada and Fumihiro Wakai (National Institute for Materials Science (NIMS)) | ||
|
S3-O1-A-2 P00147 (11:30 - 11:45) |
Deformation behaviors and fracture strength of β-Si3N4 single crystals | |
| Junichi Tatami*, Mami Tanabe, and Motoyuki Iijima (Yokohama National University), Tsukaho Yahagi and Takuma Takahashi (Kanagawa Institute of Industrial Science and Technology), Hiromi Nakano (Toyohashi University of Technology), Tatsuki Ohji (Yokohama National University) | ||
|
S3-O1-A-3 P00312 (11:45 - 12:00) |
Fine-grained ZrO2-WC composite ceramics fabricated by two-step hot-pressing | |
| Jae-Hyeong Choi (Korea Institute of Materials Science), Seongwon Kim (Korea Institute of Ceramic Engineering & Technology), Ha-Neul Kim* (Korea Institute of Materials Science) | ||
|
S3-O1-B - Engineering Ceramics
|
|
||||
|
S3-O1-B-4 P00118 (13:30 - 13:50) |
[Invited] Joining of SiC Focused on Reaction-Bonded SiC Formation by Molten Si Infiltration to a Filler Tape Composed of SiC and C | |
| Sebin Park, Soo Yeon Joo, Ji Woo Jung, and Dang-Hyok Yoon* (Yeungnam University) | ||
|
S3-O1-B-5 P00162 (13:50 - 14:05) |
Effects of Electric Current and Input Power on Grain Growth Behavior of 8YCSZ Polycrystals | |
| Koji Morita* (National Institute for Materials Science (NIMS)), Akio Ishii (Tokyo University of Science), Kohta Nambu (Kyushu University), Kohei Soga (Tokyo University of Science) | ||
|
S3-O1-B-6 P00188 (14:05 - 14:20) |
MAX phase as bond coats in thermal barrier coating system | |
| Hyokyeong Kim and Jiwoong Kim* (Soongsil university) | ||
|
S3-O1-B-7 P00251 (14:20 - 14:35) |
Corrosion Resistance of Rare Earth Silicate Solid Solution against Molten CMAS for Coating Application | |
| Min-Soo Nam (Korea Institute of Ceramic Engineering and Technology), Sahn Nahm (Korea University), Seongwon Kim* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-O1-B-8 P00177 (14:35 - 14:50) |
Effect of powder mixing on the density of green body via Binder Jetting | |
| Akihiro Shimamura*, Chika Matsunaga, Ying Chung, Mikinori Hotta, and Naoki Kondo (National Institute of Advanced Industrial Science and Technology) | ||
|
S3-O1-C - Engineering Ceramics
|
|
||||
|
S3-O1-C-9 P00179 (15:00 - 15:20) |
[Invited] Detection of multiple cracking of the SiC/SiC composite material by the Talbot-Lau interferometer | |
| Masaki Kotani* (Japan Aerospace Exploration Agency), Yoshihisa Tanaka, Hiroshi Hatta, Takashi Akatsu, and Yutaka Kagawa (Tokyo University of Technology) | ||
|
S3-O1-C-10 P00127 (15:20 - 15:40) |
[Invited] Numerical and Experimental Study of In-Flight MgAl2O4 Particle Behavior in Atmospheric Plasma Spraying under Arc-Current Variation | |
| Byeong Il Min, Byeongryun Jeon, Hansol Kwon, Yeonwoo Yoo, Do Hyun Kim, Youngjin Park, Yong-Jin Kang, Sunghun Lee, and Hunkwan Park* (Korea Institute of Material Science) | ||
|
S3-O1-C-11 P00094 (15:40 - 15:55) |
Influence of Alkaline Earth Nitrate Promoters on the CRN synthesis of High-Purity Fine AlN Powders and Its Thermal Conductivity | |
| Lazuardi Ihsan Makrifatullah, Seong Min Jang, and Dang-Hyok Yoon* (Yeungnam University) | ||
|
S3-O1-C-12 P00047 (15:55 - 16:20) |
Origins and Growth of Coarse Defects Governing Ceramic Strength | |
| Satoshi Tanaka* (Nagaoka University of Technology) | ||
|
S3-O1-D - Engineering Ceramics
|
|
||||
|
S3-O1-D-13 P00214 (16:30 - 16:50) |
[Invited] Synthesis of hexaferrite nanoparticles using a highly reduced organic content | |
| Young Kuk Kim* (Korea Institute of Materials Science) | ||
|
S3-O1-D-14 P00160 (16:50 - 17:10) |
[Invited] Sustainable additive manufacturing of ceramic components using aqueous based photocurable suspensions | |
| Motoyuki Iijima*, Ryota Tomiyama, Bohua Ma, and Junichi Tatami (Yokohama National University) | ||
|
S3-O1-D-15 P00183 (17:10 - 17:25) |
Fabrication and evaluation of ceramic paste with the addition of cellulose nano fiber for direct ink writing | |
| Ying Chung*, Akihiro Shimamura, Naoki Kondo, and Mikinori Hotta (National Institute of Advanced Industrial Science and Technology) | ||
|
S3-O1-D-16 P00095 (17:25 - 17:40) |
Conversion of 3D fibrous Al2O3 to AlN felt and The Fabrication of Thermal Interface Material Using This | |
| Seong Min Jang, Lazuardi Ihsan Makrifatullah, and Dang-Hyok Yoon* (Yeungnam University) | ||
|
S3-O1-D-17 P00372 (17:40 - 17:55) |
Controlling the degree of geopolymerization reaction to improve printability in extrusion-based additive manufacturing | |
| Binghuan Gao, Yangyang Li, Hyeonjin Son, and Chang-Jun Bae* (Korea Institute of Materials Science) | ||
|
S3-O2-A - Engineering Ceramics
|
|
||||
|
S3-O2-A-1 P00213 (09:50 - 10:10) |
[Invited] Interface and Microstructure: Key Considerations for Ceramic Coatings Beyond Bulk Properties | |
| Sunghun Lee*, Yong-Jin Kang, Youngjin Park, Hansol Kwon, Hunkwan Park, Do Hyun Kim, Yeonwoo Yoo, and Eungsun Byon (Korea Institute of Materials Science) | ||
|
S3-O2-A-2 P00174 (10:10 - 10:30) |
[Invited] Effects of microstructures on deformation behavior of textured Ti-based MAX phase ceramics | |
| Ken ichi Ikeda*, Eiichi Sei, and Seiji Miura (Hokkaido University), Koji Morita, Tohru S. Suzuki, and Yoshio Sakka (National Institute for Materials Science (NIMS)) | ||
|
S3-O2-A-3 P00052 (10:30 - 10:50) |
[Invited] Near-net shaped UHTC by PIP process and an introduction of Extreme Materials Demonstration Research Center | |
| Sea Hoon Lee*, Jae il So, Hyun-hee Choi, and Ji-su Yoon (Korea Institute of Materials Science) | ||
|
S3-O2-A-4 P00131 (10:50 - 11:05) |
Anti-slurry erosion coatings of silicon-carbide based composites via chemical vapor deposition | |
| Hirokazu Katsui* (National Institute of Advanced Industrial Science and Technology (AIST)), Kazuya Shimoda (National Institute for Materials Science (NIMS)), Mikinori Hotta (National Institute of Advanced Industrial Science and Technology (AIST)) | ||
|
S3-O2-A-19 P00061 (11:05 - 11:20) |
The effects of DC electric field and current on high-temperature deformation of undoped Y2O3 and 3Y-TZP | |
| Michiko Azuma (The University of Tokyo), Mattin Pery (The University of Tokyo, École nationale des ponts et chaussées), Hiroshi Masuda (The University of Tokyo), Hidehiro Yoshida* (The University of Tokyo, Next generation zirconia Social Cooperation Program, The University of Toky) | ||
|
S3-O2-A-6 P00102 (11:20 - 11:35) |
Effect of boron and carbon additives on sintering behavior of SiC ceramics under induction heating | |
| Alin Yoshida, Anna Gubarevich, and Katsumi Yoshida* (Institute of Science Tokyo) | ||
|
S3-O2-A-7 P00304 (11:35 - 11:50) |
Improvement of the Electrical and Optical Properties of LiTaO3 Single Crystal Using Sodium Borohydride | |
| Joon Hyuk Kang, Won Bae Sohn, Ju Hyeon Choi, and Su Jong Jeon (Korea Photonics Technology Institute), Jin Hyeok Kim (Chonnam National University), Seon Hoon Kim* (Korea Photonics Technology Institute) | ||
|
S3-O2-B - Engineering Ceramics
|
|
||||
|
S3-O2-B-8 P00078 (13:30 - 13:50) |
[Invited] Off-stoichiometric Effect on Mechanical Proeprties of (Ti,Mo)Cx | |
| Shuntaro Ida* (Japan Fine Ceramics Center), Eri Nakagawa, Florian Tropper, and Takahito Ohmura (National Institute for Materials Science), Kyosuke Yoshimi (Tohoku University), Teiichi Kimura (Japan Fine Ceramics Center) | ||
|
S3-O2-B-9 P00072 (13:50 - 14:05) |
[Invited] Thermal Properties of Defect Fluorite-Structured High-Entropy Oxides for Advanced Thermal Barrier Coatings | |
| Hakbeom Jeon (Korea Institution of Ceramic engineering and technology), Yoonsuk Oh and Seongwon Kim (Korea Institute of Ceramic Engineering & Technology), In-Hwan Lee (Korea university), Jong Il Kim* (Korea Institution of Ceramic engineering and technology) | ||
|
S3-O2-B-10 P00379 (14:05 - 14:20) |
Sintering of transparent tetragonal zirconia from nanoparticle dispersions | |
| Michiyuki Yoshida*, Aki Tsuchiya, and Mitsuki Hada (Gifu University) | ||
|
S3-O2-B-11 P00093 (14:20 - 14:35) |
Sintering Behavior of Al2O3-Gd2O3 Composites for Burnable Absorber Rods in SMRs | |
| Ah-Hyeon Park, Ha Jin Gu, and Young-Jae Kim (Changwon National University), Sung-Woo Ha, Yeon-Su Na, and Kwang-Young Lim (KEPCO Nuclear Fuel Co., Ltd), Sang-Chae Jeon* (Changwon National University) | ||
|
S3-O2-B-12 P00092 (14:35 - 14:50) |
Microstructure evolution of Gd₂O₃–TiO₂ Composite during sintering for its Application to Burnable Absorber Rods for SMRs | |
| Ha Jin Gu, Young-Jae Kim, and Ah-Hyeon Park (Changwon National University), Sung-Woo Ha, Yeon-Soo Na, and Kwang-Young Lim (KEPCO Nuclear Co., Ltd), Sang-Chae Jeon* (Changwon National University) | ||
|
S3-O2-C - Engineering Ceramics
|
|
||||
|
S3-O2-C-13 P00077 (15:00 - 15:20) |
[Invited] In-situ Observation of Metallized Silicon Nitride Substrate under Thermal Cyclic Tests by Digital Image Correlation | |
| Minh Chu Ngo* (AIST Japan) | ||
|
S3-O2-C-14 P00080 (15:20 - 15:35) |
BN Interphase Formation for SiCf/SiC Composites by Pulsed DC Electrophoretic Deposition Process | |
| Katsumi Yoshida*, Daichi Sakakibara, and Anna Gubarevich (Institute of Science Tokyo), Masaki Kotani (Japan Aerospace Exploration Agency (JAXA)) | ||
|
S3-O2-C-15 P00374 (15:35 - 15:50) |
Effects of MgSiN2 Additives and Sample Sizes on the Properties of Silicon Nitride Ceramics | |
| Ying Liu and Ha-Neul Kim* (Korea Institute of Materials Science) | ||
|
S3-O2-C-16 P00091 (15:50 - 16:05) |
Diffusion induced grain-boundary migration in Gd2O3-ZrO2 composite for a burnable absorber | |
| Young Jae Kim, Ha Jin Gu, and Ah-Hyeon Park (Changwon National University), Sung-Woo Ha, Yeon-Soo Na, and Kwang-Young Lim (KEPCO Nuclear Fuel Co., Ltd.), Sang-Chae Jeon* (Changwon National University) | ||
|
S3-O2-C-17 P00110 (16:05 - 16:20) |
Improved Thermal Conductivity Measurement of EB-PVD Thermal Barrier Coatings Using Various Methods | |
| Gye Won Lee and Tae Jun Park (Korea Institute of Ceramic Engineering & Technology), Jong Il Kim (Korea Institute of Ceramic Engineering and Technology), In-Hwan Lee (Korea university), Yoonsuk Oh* (Korea Institute of Ceramic Engineering & Technology) | ||
|
S3-O2-D - Engineering Ceramics
|
|
||||
|
S3-O2-D-18 P00169 (16:30 - 16:45) |
Drying Mechanism Study in Multiple Ceramic Coating Layers | |
| Esha Rasheed and Chang-Jun Bae* (Korea Institute of Materials Science) | ||
|
S3-O2-D-21 P00111 (16:45 - 17:00) |
Microstructure and Mechanical Properties of Al2O3-based Eutectic Ceramics Produced by Flash Sintering Technique | |
| Yuta Aoki, Hiroshi Masuda, and Hidehiro Yoshida* (The University of Tokyo) | ||
|
S3-O2-D-20 P00279 (17:00 - 17:15) |
Sintering behavior and mechanical properties of spark plasma-sintered ZrB2 with the addition of boron nitride nanotubes | |
| Seungyun Lee (Korea institute of Ceramic Engineering and Technology), Byeongho Ahn (Korea Institute of Ceramic Engineering and Technology), Hunsu Lee and Hyeondeok Jeong (Korea Institute of Science and Technology), Hoo-Jeong Lee (Sungkyunkwan University), Sung-Soo Ryu* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P1 - Engineering Ceramics
|
|
||||
|
S3-P1-1 P00282 |
Effect of sliding tests on the mechanical properties near the surface of α/β SiAlON composite ceramics | |
| Yuto Masuda, Junichi Tatami*, Motoyuki Iijima, and Tatsuki Ohji (Yokohama National University), Kentaro Yoshida and Takuma Takahashi (Kanagawa Institute of Industrial Science and Technology), Hiromi Nakano (Toyohashi University of Technology) | ||
|
S3-P1-2 P00270 |
Cyclic Fatigue of Grain Boundary in High Thermal Conductivity Si3N4 Ceramics | |
| Komaki Matsuura, Junichi Tatami*, Motoyuki Iijima, and Kazami Matsui (Yokohama National University), Takuma Takahashi (Kanagawa Institute of Industrial Science and Technology), Hiromi Nakano (Toyohashi University of Technology), Tatsuki Ohji (Yokohama National University) | ||
|
S3-P1-3 P00238 |
Fabrication of complex-shaped porous alumina structures by DLP-3D printing using interparticle photo-cross-linkable suspension | |
| Fumiya Yokomori, Junichi Tatami, and Motoyuki Iijima* (Yokohama National University) | ||
|
S3-P1-4 P00236 |
Inhomogeneous microstructure observation of SiO2 green bodiesfabricated by DLP-3D printing | |
| Misato Takahashi, Junichi Tatami, and Motoyuki Iijima* (Yokohama National University) | ||
|
S3-P1-5 P00349 |
Microscale rising R-curve behavior of silicon nitride ceramics | |
| Takahiro Saito and Tatsuki Ohji (Yokohama National University), Takuma Takahashi (Kanagawa Institute of Industrial Science and Technology), Motoyuki Iijima and Junichi Tatami* (Yokohama National University) | ||
|
S3-P1-6 P00368 |
Optimizing SiC/MAX Phase Ceramic Joints: FEM Analysis of Residual Stress Influenced by Filler Thickness and Temperature | |
| Pipit Fitriani*, Ikhlas Maulana, Ekavianty Prajatelistiya, Fatimah Arofiati Noor, and Galuh Sukmarani (Institut Teknologi Bandung) | ||
|
S3-P1-7 P00307 |
Electrical Conductivity Measurement System for Ceramic Materials in Solid Oxide Fuel Cells | |
| Hyorin Kim* and Tae Ho Shin (KICET) | ||
|
S3-P1-8 P00300 |
Effect of Soluble Tellurium on Corrosion Behavior of Various Structural Alloys for Long-term Operation of Molten Salt Reactors | |
| Su Hyeong Kim, Ji Hyeok Choi, Hyunji Jung, and Young Soo Yoon* (Gachon University) | ||
|
S3-P1-9 P00297 |
Synergetic Effects for Lithium Metal Anodes Enabled by Integrated Structural and Interfacial Modification of Current Collectors | |
| Ji Hyun Lee, Ha Eun Kang, Min Wook Kim, and Young Soo Yoon* (Gachon University) | ||
|
S3-P1-10 P00283 |
Microstructural control and mechanical properties of mullite columnar-based refractory saggars via MgO addition in Kaolin-alumina mixtures | |
| Seokhyeon Lee and Kijae Kim* (Sungkyunkwan University, Suwon), Jin-Ho Kim and Yoonki Byun (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P1-11 P00275 |
Fabrication of mullite whisker-foamed porous refractory ceramics for high-temperature thermal insulation | |
| Seung Gyu Kim and Ki-Jea Kim* (Sungkyunkwan University), Jin-Ho Kim, Jung-Hoon Choi, Kyu-Sung Han, and Kwang-Taek Hwang (Korea institute of ceramic engineering and technology) | ||
|
S3-P1-12 P00268 |
Anisotropic Properties of BN Phase in BNNT-Reinforced AlN Ceramic Substrate | |
| Byeong-Soo Park (Sungkyunkwan University/Korea Institute of Ceramic Engineering and Technology), Sung-Soo Ryu*, Byung-Ho Ahn, and Jae-Jin Cho (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P1-13 P00261 |
Optimization of Ni Silicide Formation on 4H-SiC by Laser Annealing | |
| Gyunseo Kim (Korea Institute of Ceramic Engineering & Technology), Beom-Sang Kim, Ha-Seung Lee, Chan-Ho Hong, and Sang-Hyeon Ji (AP systems Corporation), Marko Seifert (Fraunhofer IWS), Tae-Yong Park and Seong Min Jeong (Korea Institute of Ceramic Engineering and Technology), Jungwook Min (Kumoh National Institute of Technology), Yun-Ji Shin* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P1-14 P00260 |
Purification of silicon nitride(Si3N4) for heat dissipation substrate through chemical treatment | |
| Jiyeon Kim (KICET, Yonsei University), YooJin Kim* (KICET) | ||
|
S3-P1-15 P00253 |
Enhanced thermal and mechanical properties of aluminum nitride ceramics through controlled whisker alignment: A comparative study of unidirectional and bidirectional configurations | |
| Yewon Seo and Byeongho Ahn (KICET), Hyeondeok Jeong (KIST), Sahn Nahm (Korea University), Sung-Soo Ryu* (KICET) | ||
|
S3-P1-16 P00252 |
Corrosion Behavior and Thermal Properties of Yb-silicate Materials under IGCC Slag Environments | |
| Min-Soo Nam (Korea Institute of Ceramic Engineering and Technology), Sahn Nahm (Korea University), Seongwon Kim* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P1-17 P00241 |
Tuning the Pore Architecture in Hybrid Carbon Foams Derived from Phenolic Resin | |
| Seong Yeon Park and Kwang Youn Cho* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P1-18 P00239 |
Enhanced Epoxy Composites Reinforced by 3D-Aligned Aluminum Borate Nanowhiskers | |
| Hyunseung Song and Kiho Song (Korea Institute of Ceramic Engineering and Technology), Haejin Hwang (Inha University), Changui Ahn* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P1-19 P00324 |
Effects of SiC and TiB2 on the mechanical properties of B4C-SiC-TiB2-Graphite composites fabricated by reaction Hot-Pressing using B4C, SiC and TiC as the starting materials | |
| JunHyung Park and Dongjun Kim (Korea University), Sang Whan Park* (Korea Institute of Science and Technology) | ||
|
S3-P1-20 P00364 |
Thermal Conductivity Reduction and CMAS Resistance of High-Entropy Rare-Earth Silicate Compositions for EBCs | |
| Jung Hwan Park, Hassan Nafees, Minsoo Kim, Unseo Kim, Gyeongryeol Bae, Sangmin Park, Jeongmin Seo, Hyemin Yong, Seunghyun Bae, Yeseob Lee, Yongjun Kim, JaeHyeun Kim, and Dowon Song* (Kumoh National Institute of Technology) | ||
|
S3-P1-21 P00363 |
High-Entropy Carbides as Plasma-Resistant Alternatives to SiCin Semiconductor Manufacturing | |
| Yongjun Kim, Dowon Song*, Nafees Hassan, Minsoo Kim, Unseo Kim, Gyeongryeol Bae, Sangmin Park, Junghwan Park, Jeongmin Seo, Seunghyun Bae, Yeseob Lee, Hyemin Yong, JaeHyeun Kang, and Mingyu Kim (Kumoh National Institute of Technology) | ||
|
S3-P1-22 P00361 |
Thermal Conductivity Reduction and CTE Control in High-Entropy Oxides for Advanced TBC Applications | |
| Sangmin Park, Nafees Hassan, Minsoo Kim, Unseo Kim, Gyeongryeol Bae, Junghwan Park, Jeongmin Seo, Seunghyun Bae, Yeseob Lee, Yongjun Kim, Hyemin Yong, JaeHyeun Kang, and Dowon Song* (Kumoh National Institute of Technology) | ||
|
S3-P1-23 P00360 |
Optical and Structural Analysis of Sintered Zinc Sulfide by Hot Isostatic Pressing | |
| Hojun Choi* (PEMLAB) | ||
|
S3-P1-24 P00359 |
Design of Chemically Stable, High-Melting-Point High-Entropy Oxides for Advanced Plasma Etching Environments | |
| Jae hyeun Kang, Nafees Hassan, Minsoo Kim, Unseo Kim, Gyeongryeol Bae, Sangmin Park, Junghwan Park, Jeongmin Seo, Seunghyun Bae, Yeseob Lee, Yongjun Kim, Hyemin Yong, and Dowon Song* (Kumoh National Institute of Technology) | ||
|
S3-P1-25 P00358 |
Structural and crystallographic analysis of Sintered Silicon Carbide by Hot Isostatic Pressing | |
| SeongHa Hwang, Kamble Girish, and Jin Hyeok Kim* (Chonnam National University) | ||
|
S3-P1-26 P00357 |
Enhancing Plasma Resistance of SiC Components via UHS-Induced Phase Transformation | |
| Seunghyun Bae, Nafees Hassan, Minsoo Kim, Unseo Kim, Gyeongryeol Bae, Sangmin Park, Junghwan Park, Jeongmin Seo, Yeseob Lee, Yongjun Kim, Hyemin Yong, JaeHyeun Kang, and Dowon Song* (Kumoh National Institute of Technology) | ||
|
S3-P1-27 P00356 |
High-Entropy RE₂FeTaO₇ Oxides with Ultra-Low Thermal Conductivity for Next-Generation Thermal Barrier CoatingsHigh-Entropy RE₂FeTaO₇ Oxides with Ultra-Low Thermal Conductivity for Next-Generation Thermal Barrier Coatings | |
| Gyeongryeol Bae, Dowon Song*, Nafees Hassan, Minsoo Kim, Unseo Kim, Sangmin Park, Junghwan Park, Jeongmin Seo, Seunghyun Bae, Yeseob Lee, Yongjun Kim, Hyemin Yong, and JaeHyeun Kang (Kuomh National Institute of Technology) | ||
|
S3-P1-28 P00355 |
Development of low thermal expansion, high strength LAS ceramics from melt glass powder | |
| Junsu Lee* (Korea Institute of Ceramic Engineering and Technology-Kyonggi University), Keonhee Cho, Junghun Kim, and Jong-Young Kim (KICET) | ||
|
S3-P1-29 P00354 |
Influence of Crystal Structure on Plasma Etching Resistance of Y₂O₃–Al₂O₃ Compounds | |
| Yeseob Lee, Nafees Hassan, Minsoo Kim, Unseo Kim, Gyeongryeol Bae, Sangmin Park, Junghwan Park, Jeongmin Seo, Seunghyun Bae, Yongjun Kim, Hyemin Yong, JaeHyeun Kang, and Dowon Song* (Kumoh National Institute of Technology) | ||
|
S3-P1-30 P00329 |
TGO Growth Behavior and Durability of MCrAlY Bond Coatsfor Advanced TBC Systems | |
| Sohee Baek, Janghyeok Pyeon, Jeonghyeon Lee, Junhyeok Nam, Jeong Hun Son, Byung-il Yang, SeungCheol Yang, and Yeon-Gil Jung* (Changwon National University) | ||
|
S3-P1-31 P00326 |
Effect of Composition Design on the Tetragonality and Mechanical Properties of High Entropy Oxides | |
| Janghyeok Pyeon, Jeonghyeon Lee, Sohee Baek, Junhyeok Nam, Zhijie Hao, Hongbin Cheng, Jeong Hun Son, and Byung-il Yang (Changwon National University), Dowon Song (Kumoh National Institute of Technology), SeungCheol Yang and Yeon-Gil Jung* (Changwon National University) | ||
|
S3-P2 - Engineering Ceramics
|
|
||||
|
S3-P2-1 P00230 |
The effect of oxygen and excess carbon on the densification behavior of polycrystalline SiC fibers stabilized by electron beam irradiation | |
| HyukJun Lee, SuYeon Kim, and TaeHyeon Kim (Korea Institute of Ceramic Engineering and Technology), Young Keun Jeong (Pusan National University), KwangYeon Cho and YoungJun Joo* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P2-2 P00229 |
Fabrication and mechanical properties of amorphous SiC-based ablative TPS for space reentry vehicles | |
| SuYeon Kim, HyukJun Lee, TaeHyeon Kim, YoungJun Joo*, Kwang Youn Cho, and Youngkeun Jeong (KICET) | ||
|
S3-P2-3 P00228 |
In-situ high-temperature fracture behavior of polymer-derived SiC fibers for extreme environment | |
| HyukJun Lee, SuYeon Kim, and TaeHyeon Kim (Korea Institute of Ceramic Engineering & Technology), Young Keun Jeong (Pusan National University), KwangYeon Cho and YoungJun Joo* (Korea Institute of Ceramic Engineering & Technology) | ||
|
S3-P2-4 P00227 |
Microstructural Analysis of ZrC/SiC Gradient Composite Fibers by Electrospinning | |
| TaeHyeon Kim, HyukJun Lee, and SuYeon Kim (Pusan National University/Korea Institute of Ceramic Engineering & Technology), YoungJun Joo* and Kwang Youn Cho (Korea Institute of Ceramic Engineering & Technology), Young Keun Jeong (Pusan National University) | ||
|
S3-P2-5 P00224 |
The infuence of graphite crystallinity and surface coupling on graphite-resin composite solide lubricants | |
| Kwang Youn Cho* and Seong Yeon Park (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P2-6 P00197 |
Functionalized MXene anodes for high-performance lithium-ion batteries | |
| Kwonyeol Lee and Jiwoong Kim* (Soongsil University) | ||
|
S3-P2-7 P00191 |
Thermodynamic analysis of the Ti-O-H System based on DFT calculations for oxygen control in Titanium | |
| Changjoong Kim and Jiwoong Kim* (Soongsil University) | ||
|
S3-P2-8 P00189 |
Design of Delamination-resistant Bond Coats for Multilayer Thermal Barrier Coatings: A Thermal-Structural Coupled Finite Element Analysis | |
| Sooah Kyung and Jiwoong Kim* (Soongsil University) | ||
|
S3-P2-9 P00161 |
Application of 513 MHSH (Magnesium Hydroxide Sulfate Hydrate) as a flame retardant for wires | |
| Jiyeon Kim (KICET, Yonsei University), Seong-Ju Hwang (Yonsei university), YooJin Kim* (KICET) | ||
|
S3-P2-10 P00159 |
Synthesis of 513 MHSH (Magnesium Hydroxide Sulfate Hydrate) using domestic resource, Sea bittern and Dolomite | |
| Jiyeon Kim (KICET, Yonsei University), Seong-Ju Hwang (Yonsei university), YooJin Kim* (KICET) | ||
|
S3-P2-11 P00155 |
Processing of highly dense rGO-reinforced B₄C-SiC composites with enhanced mechanical properties at lower temperatures via reactive spark plasma sintering | |
| Dulal Das, Jinha Kim, and Hyeondeok Jeong* (Korea Institute of Science & Technology (KIST)) | ||
|
S3-P2-12 P00148 |
Influence of Granule Powder Including Additives on Liquid-Phase Sintering Behavior and Properties of Black Alumina | |
| Seong-Do Kim, Min-Jeo Kim, and Sang Jin Lee* (Mokpo National University) | ||
|
S3-P2-13 P00134 |
Co-Doped PMN-PZ-PT Transparent Ceramics with Enhanced Piezoelectric Properties and Thermal Stability | |
| Yeonbee Han and Wook Jo* (UNIST) | ||
|
S3-P2-14 P00129 |
Development of BNNT and BN Fiber Manufacturing Technology for Thermal Conductive Fillers Using Boron Oxide Chemical Vapor Deposition Method | |
| Minseok Cho, Mina Ryu, Taehwan Oh, and Hyeondeok Jeong* (Korea Institute of Science and Technology (KIST)) | ||
|
S3-P2-15 P00115 |
NiWO4-WO3 Composites for Leakage Suppression in TENGs | |
| Wooseong Jeong, Gi Hyoun Han, and Kyu Hyoung Lee* (Yonsei University) | ||
|
S3-P2-16 P00051 |
Effects of Oxide Additives on the Microstructure and Crystal Structure of Gas-Pressure-Sintered Silicon Nitride | |
| Minseok Jeong, Dong Won Kim, and Kyoung-Seok Moon* (Gyeongsang National University) | ||
|
S3-P2-17 P00317 |
Glassy-Phase-Assisted Densification of Oxide-Based Solid Electrolytes for High Ionic Conductivity | |
| Sung Sik Yang, Beomsu Park, Hae Yeong Lee, Hyun Ah Ko, and Young Soo Yoon* (Gachon University) | ||
|
S3-P2-18 P00323 |
Investigation of Hot Isostatic Pressing Effects on the Microstructure and Mechanical Properties of 3D‑Printed SiC for Space Optics | |
| Je Hwan Hwang, Soyoung Kim, Won Bae Sohn, Karam Han, Jung Hwan In, Ju Hyeon Choi, and Seon Hoon Kim* (Korea Photonics Technology Institute) | ||
|
S3-P2-19 P00305 |
Impurity Reduction through Powder Pretreatment for Single Crystal Growth | |
| Su Jong Jeon, Won Bae Sohn, Je Hwan Hwang, and Seon Hoon Kim (Korea Photonics Technology Institute), Jin Hyeok Kim (Chonnam National University), Ju Hyeon Choi* (Korea Photonics Technology Institute) | ||
|
S3-P2-20 P00301 |
Design and Fabrication of Li4SiO4@Li2TiO3 Core–Shell Structures for Enhanced Tritium Breeder Performance | |
| Min Wook Kim (Gachon University), Young Ah Park (Korea institute of Fusion Energy), Ji Hyeok Choi (Gachon University), Yi-Hyun Park (Korea institute of Fusion Energy), Young Soo Yoon* (Gachon University) | ||
|
S3-P2-21 P00345 |
Compositional tuning of WC-reinforced AlN ceramics for enhanced plasma etch resistance | |
| Nafees Hassan, Minsoo Kim, Unseo Kim, Gyeongryeol Bae, Sangmin Park, Junghwan Park, Jeongmin Seo, Seunghyun Bae, Yeseob Lee, Yongjun Kim, Hyemin Yong, JaeHyeun Kang, and Dowon Song* (Kumoh National Institute of Technology) | ||
|
S3-P2-22 P00344 |
Influence of Lattice Energy on Plasma Etching Behavior of High-Entropy Oxides for Semiconductor Applications | |
| Jeongmin Seo, Minsoo Kim, Nafees Hassan, Yeseob Lee, Yongjun Kim, JaeHyeun Kang, Unseo Kim, Gyeongryeol Bae, Sangmin Park, Junghwan Park, Seunghyun Bae, Hyemin Yong, and Dowon Song* (Kumoh National Institute of Technology) | ||
|
S3-P2-23 P00343 |
Enhancement of Thermal and Mechanical Properties of AlN Ceramics Using Fluoride-Based Sintering Aids | |
| Hyemin Yong, Nafees Hassan, Unseo Kim, Gyeongryeol Bae, Sangmin Park, Junghwan Park, Jeongmin Seo, Seunghyun Bae, Yeseob Lee, Yongjun Kim, Jaehyeon Kang, Minsoo Kim, and Dowon Song* (Kumoh National Institute of Technology) | ||
|
S3-P2-24 P00341 |
Degradation Behavior of Gas Turbine Thermal Barrier Coatings under Hydrogen Co-firing Environments | |
| Unseo Kim, Nafees Hassan, Minsoo Kim, Gyeongryeol Bae, Sangmin Park, Junghwan Park, Jeongmin Seo, Seunghyun Bae, Yeseob Lee, Youngjun Kim, Hyemin Yong, JaeHyeun Kang, and Dowon Song* (Kumoh National Institute of Technology) | ||
|
S3-P2-25 P00337 |
Plasma Resistance Evaluation of Surface-fluorinated APS Y2O3 coatings via YF3 Heat Treatment Process | |
| Jiwon Choi and Kangduk Kim* (Kyonggi University), Daegeun Kim and Hyewon Seok (Hansol IONES Co., Ltd) | ||
|
S3-P2-26 P00336 |
Polycarbosilane-Assisted Fabrication of Monolithic SiC with Interconnected Pore Channels | |
| Wonseok Lee, Jeongae Kim, and Dong-Guen Shin (Korea Institute of Ceramic Engineering and Technology), Wonguen Son (DSTECHNO CO.), Yoonjoo Lee* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P2-27 P00335 |
High-Temperature SiC Formation from Polycarbosilane under Oxidation-Free Conditions | |
| Jeongae Kim, Dong-Guen Shin, and Yoonjoo Lee* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S3-P2-28 P00334 |
The Effects of Boron and Carbon Addition on Fabrication of Reaction Bonded Boron Carbide | |
| Dongjun Kim, JunHyung Park, and Sahn Nahm (Korea University), Seung Yong Lee and Sang Whan Park* (Korea Institute of Science and Technology) | ||
|
S3-P2-29 P00333 |
Novel strategy for suppressing the electrical conductivity of high-loaded CNT/epoxy composites prepared using powder atomic layer deposition | |
| Donggeon Shin (KOREA INSTITUTE OF CERAMIC ENGINEERING AND TECHNOLOGY), Yoonsoo Han* (Korea Institute of Ceramic Engineering & Technology (KICET)) | ||
|
S3-P2-30 P00378 |
Characteristics of DLP-Based Additive Manufacturing of Aesthetic Ceramics Using Alkali Silicate Oxides | |
| Moon-Jin Hwang and Byeong-Mo Kang (Kuwotech Co. Ltd.), Kyoung-Jun Jang (3D Controls Co. Ltd.), Youn-Wook Chun (Korea Conformity Laboratories(KCL)), Sang Jin Lee* (Mokpo National University) | ||
|
S4-O1-A - Bio, glass and porous ceramics
|
|
||||
|
S4-O1-A-1 P00318 (11:10 - 11:30) |
[Invited] Examination of Lithium Silicate Glasses Using Inelastic Light Scattering | |
| Hirokazu Masai* (National Institute of Advanced Industrial Science and Technology (AIST)) | ||
|
S4-O1-A-2 P00030 (11:30 - 11:50) |
[Invited] Structural Evolution in Sodium Aluminosilicate Glasses through Substitution of Al₂O₃ with P₂O₅: Insights from High-Resolution 17O Solid-State NMR | |
| Tae-min Yeo*, Elias El Ghazaoui, Hye Jeong Jung, Jin Jung Kweon, and Sung Keun Lee (Seoul National University) | ||
|
S4-O1-A-3 P00182 (11:50 - 12:10) |
[Invited] Structure of hydrous and carbon-bearing aluminosilicate glasses quenched from melts at high pressure | |
| Eun Jeong Kim* (Kongju National University) | ||
|
S4-O1-A-4 P00353 (12:10 - 12:25) |
Development of Interatomic Potential for Pb-B-O System and Evaluation of Structural Reproducibility in Crystalline and Glass Structures | |
| Ran Miyawaki, Yasuhiko Benino*, Tokuro Nanba, and Shinichi Sakida (Okayama University), Atsushi Mukunoki, Tamotsu Chiba, and Takahiro Kikuchi (JGC Japan Corporation), Hitoshi Owada (Radioactive Waste Management Funding and Research Center) | ||
|
S4-O1-B - Bio, glass and porous ceramics
|
|
||||
|
S4-O1-B-5 P00294 (13:30 - 13:50) |
[Invited] Atomistic view of surface stress induced by ion exchange in chemically strengthened glass | |
| Nobuaki Terakado* (Kyoto University), Shuji Orihara (Orihara Industrial Co., Ltd.), Kazuro Kizaki (Tohoku University), Takumi Fujiwara (Tohoku Polytechnic College) | ||
|
S4-O1-B-6 P00103 (13:50 - 14:10) |
[Invited] Compositional Effects of Al2O3 and MgO on the Structure and Chemical Strengthening Behavior of Sodium Aluminosilicate Glasses | |
| Jaeyeop Chung* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-O1-B-7 P00350 (14:10 - 14:25) |
Chlorination Volatilization Behavior of Heavy Metal Ions in Soils | |
| Toa Shikama, Yuki Mimura, Shinichi Sakida, Yasuhiko Benino, and Tokuro Nanba* (Okayama University) | ||
|
S4-O1-B-8 P00195 (14:25 - 14:40) |
Compositional Effects on Chemical Strengthening, Mechanical Properties and Structural Change of SiO2-B2O3-Al2O-Na2O | |
| Jin Wook Jang, Kyeong Dae Park, Seo Yoon Lee, and Woon Jin Chung* (Kongju National University) | ||
|
S4-O1-B-9 P00248 (14:40 - 14:55) |
Structure and property relationships in ZnO containing borosilicate glasses: Effects of CaO and CaF2 on antibacterial activity | |
| Junhyuk Shin and Jaeyeop Chung* (Korea Institute Of Ceramic Engineering & Technology) | ||
|
S4-O1-C - Bio, glass and porous ceramics
|
|
||||
|
S4-O1-C-10 P00113 (15:00 - 15:20) |
[Invited] Carbonate Apatite Honeycomb Scaffolds for Medical and Dental Applications | |
| Koichiro Hayashi* (Kyushu University) | ||
|
S4-O1-C-11 P00058 (15:20 - 15:40) |
[Invited] DNApatite: An Elastic Apatite with Sub-Nanometer Scale Organo–Inorganic Structures | |
| Jung Heon Lee* (Sungkyunkwan University (SKKU)) | ||
|
S4-O1-C-12 P00146 (15:40 - 16:00) |
[Invited] Design of Pore-controlled Calcium Phosphate Cements Using Spherical Porous Granules | |
| Masanobu Kamitakahara* (Tohoku University) | ||
|
S4-O1-C-13 P00249 (16:00 - 16:15) |
Verification of Apatite-Forming Ability and Protein Adsorption Behavior of Apatite Nuclei-incorporated Cellulose Acetate | |
| Takumi Kato, Shigeomi Takai, and Takeshi Yabutsuka* (Kyoto University) | ||
|
S4-O1-C-14 P00139 (16:15 - 16:30) |
Synthesis of Borate Bioactive Glass Powders via the Sol–gel Method Using Nitrate Precursors | |
| Kyosuke Ueda*, Jun Rey Sullano Lincuna, and Takayuki Narushima (Tohoku University) | ||
|
S4-O1-D - Bio, glass and porous ceramics
|
|
||||
|
S4-O1-D-15 P00104 (16:30 - 16:50) |
[Invited] Laser-Based Coating Strategies for Advancing Implant Biofunctionality | |
| Hojeong Jeon* (Korea Institute of Science and Technology) | ||
|
S4-O1-D-16 P00088 (16:50 - 17:10) |
[Invited] Serum Fetuin-A Adsorption onto Octacalcium Phosphate Regulates Osteoblastic Differentiation of Mesenchymal Stromal Cells | |
| Ryo Hamai*, Kaori Tsuchiya, and Osamu Suzuki (Tohoku University) | ||
|
S4-O1-D-17 P00122 (17:10 - 17:30) |
[Invited] Advanced Biomaterials for Bone Repair: Hybrids and Coacervates | |
| Justin J Chung* (Seoul National University Hospital) | ||
|
S4-O1-D-18 P00243 (17:30 - 17:45) |
Antibacterial Activity of Metal-Doped Titanate Nanosheets: Influence of Chemical Composition | |
| Kai Kamada*, Rika Hayashida, Jooho Jung, Hideaki Sano, and Osamu Nakagoe (Nagasaki University) | ||
|
S4-O1-D-19 P00153 (17:45:18:00) |
Control of Cross-Contamination in Stereolithography-Based Ceramic-Metal Multi-Material Additive Manufacturing | |
| Muhammad Bilal, Chang Woo Gal, and Hui suk Yun* (Korea Institute of material Science (KIMS)) | ||
|
S4-O2-A - Bio, glass and porous ceramics
|
|
||||
|
S4-O2-A-1 P00168 (09:40 - 10:00) |
[Invited] Understanding the forces that control cell fate and disease progression | |
| Yongsung Hwang* (Soonchunhyang University) | ||
|
S4-O2-A-2 P00141 (10:00 - 10:20) |
[Invited] Apatite-forming Ability of Organic-inorganic Composites Containing Titanium-based Oxides Fillers in Simulated Body Fluid | |
| Chikara Ohtsuki*, Satoko Ito, Yuko Matsukawa, and Kazumasa Suzuki (Nagoya University) | ||
|
S4-O2-A-3 P00034 (10:20 - 10:40) |
[Invited] Bone-Inspired Dynamically Adaptive Ceramic Composites for Resilient, Sustainable, and Healthy Future | |
| Sung Hoon Kang* (Korea Advanced Institute of Science and Technology (KAIST)) | ||
|
S4-O2-A-4 P00067 (10:40 - 11:00) |
[Invited] Potential of Fe2–3N Particles as Thermoseeds in Magnetic Hyperthermia | |
| Masakazu Kawashita* (Institute of Science Tokyo) | ||
|
S4-O2-A-5 P00366 (11:00 - 11:15) |
Apatite Coating on Organic Polymer Microsphere by Aqueous Solution Method Focusing on Effects of Surface Functional Groups | |
| Takeshi Yabutsuka*, Kota Nakanishi, and Shigeomi Takai (Kyoto University) | ||
|
S4-O2-A-6 P00138 (11:15 - 11:30) |
Ibuprofen-Intercalated Layered Double Hydroxides in Electrospun PMMA Fibers for Improved Transdermal Drug Delivery | |
| Van Thi Thanh Tran, Hideaki Sano, Osamu Nakagoe, Shuji Tanabe, and Kai Kamada* (Nagasaki University) | ||
|
S4-O2-A-7 P00157 (11:30 - 11:45) |
Synergistic Effect of Carbonate Ions and Alkaline Phosphatase on Apatite Formation from Bioresponsive Ceramics | |
| Wanyu Dong*, Kazumasa Suzuki, and Yuko Matsukawa (Nagoya University), Taishi Yokoi (Institute of Science Tokyo), Chikara Ohtsuki (Nagoya University) | ||
|
S4-O2-A-8 P00242 (11:45 - 12:00) |
Sustainable Synthesis of Calcium Carbonate from Oyster Shells: Effect of Carboxylic Acids on Calcium Extraction and Phase Transformation | |
| Sangheon Lee, Hyun Sik Kim, Ji Yeon Park, and Hye Sun Lee (Korea Institute of Ceramic Engineering and Technology), Byoung-In Sang (Hanyang University), Jinhyung Lee* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-O2-A-9 P00021 (12:00 - 12:15) |
Combinatorial effects of inorganic ions on proliferation and cytokine gene expression in macrophage | |
| Sayaka Oguri, Kazumasa Ikedo, and Akiko Obata* (Nagoya Institute of Technology) | ||
|
S4-O2-B - Bio, glass and porous ceramics
|
|
||||
|
S4-O2-B-10 P00207 (13:30 - 13:50) |
[Invited] Antireflective, Transparent, Water-Resistant, and Antibacterial ZnO-based Thin Films for Touchscreen-Based Display Applications | |
| Soon-Gil Yoon* (Chungnam National University) | ||
|
S4-O2-B-11 P00222 (13:50 - 14:10) |
[Invited] Toward Coatings that Maintain Long-Term Low Water Contact Angles | |
| Hiromitsu Kozuka*, Yuta Miyao, Yuki Kita, Manato Miki, Satoshi Shirayama, Haru Kimura, and Minoru Adachi (Kansai University) | ||
|
S4-O2-B-12 P00086 (14:10 - 14:25) |
A Numerical Analysis on Melt-Quenching Process of Telluride Glasses | |
| Ju Seong Lee, Il Jung Yoon, and Yong Gyu Choi* (Korea Aerospace University) | ||
|
S4-O2-B-13 P00085 (14:25 - 14:40) |
Assessing Precision Glass Molding Compatibility of Ternary Ge-Se-Te Chalcogenide Glasses | |
| Il Jung Yoon, Ju Seong Lee, and Yong Gyu Choi* (Korea Aerospace University) | ||
|
S4-O2-B-14 P00081 (14:40 - 14:55) |
CsPbBr3 and CsPb(Br/I)3 perovskite nanocrystals embedded in boro-silicate glass for robust display color converters using UTG substrate | |
| Devarajulu Gelija and Woon Jin Chung* (Kongju National University) | ||
|
S4-O2-B-15 P00247 (14:55 - 15:10) |
Influence of Alkaline-Earth Oxides on Ag+ Redox Chemistry in zinc alumino phosphate Glasses | |
| Jeongho Cho* (Pusan National University) | ||
|
S4-O2-B-16 P00347 (15:10 - 15:25) |
Development of LAS-based Glass-Ceramic as an Optical Materia for LEO Small Satellite Optical System | |
| Karam Han*, Yongjun Kim, YoonHee Nam, Ju Hyeon Choi, Jung Hwan In, Soyoung Kim, Je Hwan Hwang, and Seon Hoon Kim (Korea Photonics Technology Institute) | ||
|
S4-O2-C - Bio, glass and porous ceramics
|
|
||||
|
S4-O2-C-17 P00040 (15:35 - 15:55) |
[Invited] Imparting Flexibility to Porous Polysilsesquioxane Monoliths | |
| George Hasegawa* (Nagoya University) | ||
|
S4-O2-C-18 P00173 (15:55 - 16:15) |
[invited] Single-Crystalline Nanoporous Metal Oxides with Ordered Porous Structures Derived from Metal Chloride Precursors | |
| Takamichi Matsuno* (Waseda University) | ||
|
S4-O2-C-19 P00084 (16:15 - 16:35) |
[invited] Ultrasound-induced contact electrification to power electronics | |
| Hong Joon Yoon* (Gachon University) | ||
|
S4-O2-C-20 P00218 (16:35 - 16:50) |
Synthesis of CaWN2 Using a High-Pressure Metathesis Reaction | |
| Tomoya Sakaguchi (Waseda University), Tetsuya Kawashima, Masashi Miyakawa, Fumio Kawamura, and Takashi Taniguchi (National Institute for Materials Science), Ralf Riedel (Technical University of Darmstadt), Yoshiyuki Sugahara* (Waseda University) | ||
|
S4-O2-C-21 P00164 (16:50 - 17:05) |
Synthesis of nanocomposite of octahedral molybdenum cluster and titania nanoparticle for water purification | |
| Ai Tsukahara (Waseda University), Kaplan Kirakci and Kamil Lang (Institute of Inorganic Chemistry of the Czech Academy of Sciences), Fabien Grasset (LINK), Regis Guegan (University of Orleans), Marta Feliz (Universitat Polit ecnica de Val encia, Consejo Superior de Investigaciones Cientificas), Michaela Kubanova (University of Chemistry and Technology), Yoshiyuki Sugahara* (Waseda University) | ||
|
S4-O2-C-22 P00099 (17:05 - 17:20) |
Synthesis and Structural/Dispersion Characteristics of SiO2@SiO2 Core–Shell Particles Prepared by the Stöber Process | |
| Se Hyun Kyung, Jeong Min Lee, and Gye Seok An* (Kyonggi University) | ||
|
S4-O2-C-23 P00150 (17:20 - 17:35) |
Preparation of semi-homogeneous catalyst using single and double-layered hexaniobate and Mn(III) Salen complex | |
| Yui Kasuya, Yusuke Harada, and Yoshiyuki Sugahara* (Waseda University) | ||
|
S4-O2-C-24 P00007 (17:35 - 17:50) |
Dielectric Engineering of Porous ZnO@ZIF-8 Nanohybrids for Self-Powered Humidity Sensor | |
| Venkatraju Jella, Swathi Ippili, and Soon-Gil Yoon* (Chungnam National University) | ||
|
S4-P1 - Bio, glass and porous ceramics
|
|
||||
|
S4-P1-1 P00107 |
Visible-light-induced Photocatalytic and Antibacterial Activities of Nitrogen-doped TiO2 Films Fabricated via Reactive Sputtering | |
| Sunyong Shim, Kyosuke Ueda, Kouetsu Ogasawara, and Takayuki Narushima* (Tohoku University) | ||
|
S4-P1-2 P00038 |
Antibacterial Activity of Titanium Dioxide Nanorods Layer Formed on Titanium Surface | |
| Taiyo Yukawa, Masaya Shimabukuro*, and Taishi Yokoi (Institute of Science Tokyo), Kazuhiko Noda (Shibaura Institute of Technology), Masakazu Kawashita (Institute of Science Tokyo) | ||
|
S4-P1-3 P00032 |
Near-Infrared Driven Copper Phosphate Nanosheets for Photothermal Antibacterial Therapy | |
| W M Ruvini Lasanthika Kumari Wijekoon, Masaya Shimabukuro*, Masakazu Kawashita, and Taishi Yokoi (Institute of Science Tokyo) | ||
|
S4-P1-4 P00303 |
Optimization of fabrication process for immobilized metal affinity ceramic membrane chromatography | |
| Jin-Woo Jeong (Chungbuk national university), Seung-Yeon Kim (Seoul national university), A-Jin Kim (Yonsei university), Sunghyun Kim and Seong-Joong Kim* (Korea Institute of Ceramic Engineering & Technology) | ||
|
S4-P1-5 P00302 |
Optical Properties of Lanthanum Zinc Borate Glass for High Resolution Optics | |
| YoonHee Nam, Changsik Go, Jung Hwan In, Soyoung Kim, and Seon Hoon Kim (Korea Photonics Technology Institute), Jinhyeok Kim (Chonnam National University,), Ju Hyeon Choi* (Korea Photonics Technology Institute) | ||
|
S4-P1-6 P00299 |
Illite Pellets for Feed Applications: Formulation Design to Ensure Processability and Dosing Consistency | |
| Seung Hyun Oh and Hye Sun Lee* (Korea Institute of Ceramic Engineering & Technology(KICET)), oh sung geun (Hanyang University) | ||
|
S4-P1-7 P00298 |
Preparation of metal ion-coated silica nanoparticles with antiviral effects | |
| Seung Hyun Oh and Hye Sun Lee* (Korea Institute of Ceramic Engineering & Technology(KICET)), Sung geun Oh (Hanyang University) | ||
|
S4-P1-8 P00293 |
Evaluation of Physicochemical Properties of Spherical YSZ Particles as Influenced by Increased Synthesis Scale | |
| Junseop Lee and Hye Sun Lee* (Korea Institute of Ceramic Engineering and Technology), Chanho Park (Kyungpook National University) | ||
|
S4-P1-9 P00292 |
Chemical Properties of Hydroxyapatite as Influenced by Processing Methods | |
| Junseop Lee and Hye Sun Lee* (Korea Institute of Ceramic Engineering and Technology), Chanho Park (Kyungpook National University) | ||
|
S4-P1-10 P00288 |
M13 bacteriophage mimics a biopiezoelectric building block in Nature. | |
| SangMin Lee and JuHun Lee* (Hanyang University) | ||
|
S4-P1-11 P00286 |
One-Pot Hydrothermal-Ball Milling Process for Continuous Pilot-Scale Extraction of Biogenic Silica from rice husk | |
| Jiyeon Park, Jinyung Chun, and Sangheon Lee (Korea Institute of Ceramic Engineering and Technology), Byoung-In Sang (Hanyang University), Jinhyung Lee* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-P1-12 P00285 |
Optimization of Precipitation Parameters for Monodisperse Spherical Microsilica Derived from Rice Husk | |
| Su Yeon Ha and Sangheon Lee (Korea Institute of Ceramic Engineering and Technology), Byoung-In Sang (Hanyang University), Jinhyung Lee* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-P2 - Bio, glass and porous ceramics
|
|
||||
|
S4-P2-1 P00284 |
Eco-Friendly Synthesis of Micrometer-Sized Silica Spheresfrom Rice Husk via Temperature and pH Control | |
| Yubin Lee, Su Yeon Ha, Jiyeon Park, Sangheon Lee, and Jinhyung Lee* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-P2-2 P00265 |
Calcium -Responsive ZZ-CSQ-Enabled Affinity Precipitation Combined with Tangential Flow Filtration (TFF) for Efficient Monoclonal Antibody Purification | |
| Kyuhyuk Im, Sunghyun Kim*, Heesun Park, and Jonghwan Lee (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-P2-3 P00264 |
Development and Characterization of an Affibody based Ligand for AAV2 Purification | |
| Kyuhyuk Im, Sunghyun Kim*, Heesun Park, and Jonghwan Lee (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-P2-4 P00234 |
Formation of stable selective layer for alumina nanofiltration composite membrane via addition of viscosity modifier | |
| Seung-Yeon Kim, Jin-Woo Jung, A-Jin Kim, and Seong-Joong Kim* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-P2-5 P00233 |
Synthesis of Vaterite CaCO₃ Nanoparticles via In Situ Co-Precipitation for Antigen Delivery | |
| Seung-Yeon Kim, Ji-seong Kang, Min-Kyoung Kang, Jin-Woo Jung, and A-Jin Kim (Korea Institute of Ceramic Engineering and Technology), Kangwon Lee (Seoul National University), Young-Ran Lee and Seong-Joong Kim* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-P2-6 P00232 |
Prussian blue-based hybrid nanocomposites for inhibition of JNK signaling in osteoarthritic inflammation | |
| Hyeryeon Oh and Won Il Choi* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-P2-7 P00231 |
Synthesis of porous microsilica using W/O emulsion method with hydrophilic polymers | |
| Seung-Yeon Kim, Jin-Woo Jung, A-Jin Kim, and Seong-Joong Kim* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S4-P2-8 P00199 |
Compositional Study on Dielectric and Thermal Properties of SiO2-B2O3-Al2O3-Na2O Glasses for Semiconductor Packaging Substrates | |
| Seo Yoon Lee, Jin Wook Jang, and Woon Jin Chung* (Kongju National University) | ||
|
S4-P2-9 P00196 |
Exploration of Cs3TbCl6 Perovskite Nanocrystal-Embedded Silicate Glasses for LED color converter | |
| Ji Hyun Ahn and Woon Jin Chung* (Kongju National University) | ||
|
S4-P2-10 P00125 |
Electrospun P(VDF-TrFE) Nanofibrous Membrane Based High Performing Energy Harvesting Devices | |
| Yongbin Han (Gachon university), Hong Joon Yoon* (Gachon University) | ||
|
S4-P2-11 P00124 |
Metal Mesh Ultrasound Triboelectric Nanogenerator for Optimal Energy Harvesting Property | |
| Ki Yoon Park and Hong Joon Yoon* (Gachon University) | ||
|
S4-P2-12 P00108 |
Low-k Composite Covers for 6G Smart Phones | |
| Ji Yeon Kim*, Kwan Sik Park, Wenhu Shen, Seo Yeon Han, Hye In Choi, and Yong Soo Cho (Yonsei University) | ||
|
S4-P2-13 P00351 |
Distribution Behavior of Hazardous Elements in Soils During Chlorination Heat-Treatment | |
| Yuki Mimura, Shinichi Sakida, Yasuhiko Benino, and Tokuro Nanba* (Okayama University) | ||
|
S5-O1-A - Basic Science and Traditional Ceramics
|
|
||||
|
S5-O1-A-1 P00028 (13:40 - 14:00) |
[Invited] Densification of ZrW2O8 and Zr2MP2O12 type negative thermal expansionmaterials | |
| Toshihiro Isobe* (Institute of Science Tokyo) | ||
|
S5-O1-A-2 P00240 (14:00 - 14:20) |
[Invited] Sustainable Processing of Nanomaterials via Ultrasonic Techniques | |
| Yamato Hayashi* (Tohoku University) | ||
|
S5-O1-A-3 P00250 (14:20 - 14:35) |
Fabrication of Hydroxyapatite/Zirconia Nanocomposites Using Cold Sintering Process Combined with Mineralization | |
| Yeongjun Seo*, Shiori Nawa, and Sunghun Cho (The University of Osaka), Tomoyo Goto (Nara Institute of Science and Technology), Tohru Sekino (The University of Osaka) | ||
|
S5-O1-A-4 P00158 (14:35 - 14:50) |
Heterogeneous Domain Structure in the Surface Layer of Alternating Current Poled Rhombohedral Pb(Mg1/3Nb2/3)O3−PbTiO3 Single Crystals | |
| Woo-Jin Choi (Gyeongsang National University), Hye-Lim Yu and Jeong-Woo Sun (Ulsan National Institute of Science and Technology), Sang-Goo Lee and Yoon-Sang Jeong (iBULe Photonics, Inc.), Kyoung-Seok Moon (Gyeongsang National University), Wook Jo* (Ulsan National Institute of Science and Technology) | ||
|
S5-O1-B - Basic Science and Traditional Ceramics
|
|
||||
|
S5-O1-B-5 P00049 (15:00 - 15:20) |
[Invited] Water vapor oxidation of graphite in accidental conditions of high temperature gas-cooled reactors | |
| Yi Je Cho* (Sunchon National University) | ||
|
S5-O1-B-6 P00121 (15:20 - 15:35) |
Fabrication of carbon fiber reinforced ceramic composites by cold sintering process | |
| Keitaro Yamaguchi* (Nagoya Institute of Technology) | ||
|
S5-O1-B-7 P00117 (15:35 - 15:50) |
Introducing niobium or tantalum into calcium borate sol-gel glasses | |
| Kohei Hosoki and Akiko Obata* (Nagoya Institute of Technology) | ||
|
S5-O1-B-8 P00185 (15:50 - 16:20) |
[Invited] Hydrothermal Synthesis of Seaweed-like Potassium Titanate and Its Pb2+ Sorption Property | |
| Tomoyo Goto* (Nara Institute of Science and Technology), Takumu Umemura, Yoshifumi Kondo, Yeongjun Seo, Sung Hun Cho, and Tohru Sekino (The University of Osaka) | ||
|
S5-O1-C - Basic Science and Traditional Ceramics
|
|
||||
|
S5-O1-C-9 P00342 (16:30 - 16:50) |
[Invited] Digital Twin Models of Ceramics Sintering Process designed by Multiscale & Multiphysics Simulations | |
| Jinhwa Park, Ga-Ae Ryu, and Youn-Woo Hong (Korea Institute of Ceramic Engineering and Technology), Sangil Hyun* (Seoul National University) | ||
|
S5-O1-C-10 P00023 (16:50 - 17:10) |
[Invited] Comprehensive First-Principles Lattice Dynamics Study for Thermal Properties of the Element and Binary Oxides toward Negative Thermal Expansion | |
| Yasuhide Mochizuki*, Hiroki Koiso, and Kaede Nagamatsu (Institute of Science Tokyo), Soungmin Bae (Tohoku University), Toshihiro Isobe and Akira Nakajima (Institute of Science Tokyo) | ||
|
S5-O1-C-11 P00245 (17:10 - 17:25) |
Designing NdNiFeO₃ Perovskite for Bifunctional Electrocatalysis: Electronic-Structure Insights from DFT | |
| Prabhakaran Sampath and Hyunseok Ko* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S5-O1-C-12 P00017 (17:25 - 17:40) |
Nucleation theory to predict polymorphism in non-stoichiometric system: case of TiO2-x | |
| Han Uk Lee and Sung Beom Cho* (Ajou University) | ||
|
S5-O1-C-13 P00044 (17:40 - 17:55) |
LLMs for Oxide Semiconductor Design: A New Paradigm | |
| Ji Hoon Hong, Juhyeon Ha, and Sung Beom Cho* (Ajou University) | ||
|
S5-O2-A - Basic Science and Traditional Ceramics
|
|
||||
|
S5-O2-A-1 P00145 (10:00 - 10:20) |
[Invited] Synthesis and structural characterization of layered perovskite compounds | |
| Daisuke Urushihara*, Toru Asaka, and Koichiro Fukukda (Nagoya Institute of Technology) | ||
|
S5-O2-A-2 P00315 (10:20 - 10:40) |
[Invited] Low-Dimensional Ionic Compounds: Controlled Synthesis and Structural Characterization | |
| Gyeong Hee Ryu* (Gyeongsang National University) | ||
|
S5-O2-A-3 P00031 (10:40 - 11:00) |
[Invited] Solvothermal Synthesis of Nanomaterials for Infrared Light Shielding Applications | |
| Shu Yin* (Tohoku University) | ||
|
S5-O2-A-4 P00273 (11:00 - 11:15) |
Facile synthesis of CMCNF/AgNPs composite for low-temperature sinterable conductive materials | |
| Madoka Yoshikawa (Tohoku University), Yamato Hayashi* (Tohoku university), Tatsuya Shishido and Hirotsugu Takizawa (Tohoku University) | ||
|
S5-O2-A-5 P00100 (11:15 - 11:30) |
Controlling the Sintering Dynamics and Stable Properties of YSZ through Surface Engineering with g-C₃N₄ | |
| DongWon Kim and Kyoung-Seok Moon* (Gyeongsang National University) | ||
|
S5-O2-B - Basic Science and Traditional Ceramics
|
|
||||
|
S5-O2-B-6 P00116 (13:40 - 14:00) |
[Invited] High-entropy oxides with high physicochemical plasma etching resistance under CF4/Ar/O2 atmosphere | |
| Ho Jin Ma* (Kyonggi University) | ||
|
S5-O2-B-7 P00035 (14:00 - 14:20) |
[Invited] Calcium Silicate Sol-Gel Bioactive Glasses with Controlled Ion Release | |
| Takuto Hashimi and Akiko Obata* (Nagoya Institute of Technology) | ||
|
S5-O2-B-8 P00271 (14:20 - 14:35) |
Eco-friendly facile synthesis of SiO2/Ag nanocomposite particles using ultrasound irradiation of silver formate | |
| Tatsuya Shishido (Tohoku University), Yamato Hayashi* (Tohoku university), Madoka Yoshikawa, Takaharu Nakajima, and Hirotsugu Takizawa (Tohoku University), Minoru Ueshima (Daicel Corporation) | ||
|
S5-O2-B-9 P00263 (14:35 - 14:50) |
Enhancing Thermoelectric Performance via Morphology and Surface Engineering of Silicon Nanowire Arrays | |
| Yeongjin Kim and Hyun-Sik Kim* (University of Seoul) | ||
|
S5-O2-C - Basic Science and Traditional Ceramics
|
|
||||
|
S5-O2-C-10 P00149 (15:00 - 15:20) |
[Invited] Dimensionality Control of Cu2O Nanowire Mesocrystals via a Two-Step Hydrothermal Process for a Highly Efficient Photocatalyst | |
| Kazumasa Suzuki*, Abhinav Senthil, Yuko Matsukawa, and Chikara Ohtsuki (Nagoya University) | ||
|
S5-O2-C-11 P00025 (15:20 - 15:40) |
[Invited] A novel composite of aluminum nitride and silsesquioxane polymerfor application as insulating substrates of power modules | |
| Sawao Honda* (Nagoya Institute of Technology), Yoshiaki Iwasw (TOAGOSEI Co., Ltd.), Ryosuke Kubota, Shinobu Hashimoto, and Yuji Iwamoto (Nagoya Institute of Technology) | ||
|
S5-O2-C-12 P00054 (15:40 - 15:55) |
Unveiling Thermal Expansion in Carbodiimide Compounds: The Role of Carbodiimide anions | |
| Yuji Masubuchi*, Taichi Nagai, Kazuki Kume, and Akira Miura (Hokkaido University) | ||
|
S5-O2-C-13 P00041 (15:55 - 16:10) |
Facilitated phase transfromation of calcium aluminosilicate by kaolinite-derived aluminosilicate nanoscroll | |
| Shingo Machida*, Hajime Okawa, and Masaya Suzuki (Japan Fine Ceramics Center), Toshimich Shibue (Waseda University) | ||
|
S5-P1 - Basic Science and Traditional Ceramics
|
|
||||
|
S5-P1-1 P00338 |
Room-Temperature Fabrication of WO3 Thin-Film hydrogen sensor via Aerosol Deposition Method | |
| YuanBo Zhang (Kwangwoon University), Jie Wei and Cong Wang (Harbin Institute of Technology), Jong-Min Oh* (Kwangwoon University) | ||
|
S5-P1-2 P00328 |
Moisture-Enabled Power Generation from Aerosol Deposited CsPb2Br5/Ceramic Composite Powders | |
| Seok-Hun Kim and Jong-Min Oh* (Kwangwoon University), Sunghoon Kim (Dong-Eui), Won-Il Ahn (Kwangwoon University) | ||
|
S5-P1-3 P00321 |
Comparative Analysis of Silanol and Siloxane Groups on Precipitated Silica for Passenger Car Tires via FT-IR and DBA Adsorption | |
| Keonhee Cho, Junsu Lee, and Junghun Kim* (KICET) | ||
|
S5-P1-4 P00296 |
Effect of Aliovalent Doping on Microstructure and Thermal Properties of CaAl12O19 | |
| Jae-Jun Heo, Yongwoo Son, Hongwoo Park, Mingyu Kim, and Soonil Lee* (Changwon National University) | ||
|
S5-P1-5 P00278 |
Thermal Properties of Energy-Saving Silica-Based Refractories as a Function of Al(OH)₃ Content and Firing Temperature | |
| Yongwoo Son, Woldeyohannis Bruk Sisay, and Soonil Lee* (Changwon National University), Wookyung Jeong, Yujin Choi, and Changgi Ha (KOREA REFRACTORIES CO., LTD.) | ||
|
S5-P1-6 P00262 |
Enhanced Thermoelectric Performance of ZnSb through Ag Decoration and Excess Doping | |
| Yeongjin Kim and Hyun-Sik Kim* (University of Seoul) | ||
|
S5-P1-7 P00220 |
Facile design of large-surface-area MnCO3 for enhanced bulk and interfacial lithium storage in lithium-ion batteries | |
| Yunseong Ahn and Weon Ho Shin* (Kwangwoon University) | ||
|
S5-P1-8 P00219 |
Elevating thermoelectric conversion efficiency of ZnSb via Sn incorporation | |
| Jeong Min Lee and Weon Ho Shin* (Kwangwoon University) | ||
|
S5-P1-9 P00075 |
Microstructural Evolution of the Barium Calcium Titanate System by Control of Sintering Temperature and SiO2 addition | |
| Gyeong-Lim Lee and Kyoung-Seok Moon* (Gyeongsang National University) | ||
|
S5-P1-10 P00074 |
Effect of K2CO3 Addition on Grain Growth Behavior and Dielectric Properties of the K2LaNb5O15 System | |
| Chae-Gyeong GU and Kyoung-Seok Moon* (Gyeongsang National University) | ||
|
S5-P1-11 P00206 |
Exploring the effect of amorphous film conditions on phase stability: A case study of the Sn-O system | |
| Minsung Kang and Sung Beom Cho* (AJOU University) | ||
|
S5-P1-12 P00043 |
Multiscale Insights Enable Rational Design of Solvent-Free Dry Electrode Processing for Advanced Battery Electrode Fabrication | |
| Jun Hyuk Kang and Sung Beom Cho* (Ajou university) | ||
|
S5-P1-13 P00045 |
Rational Materials Design of anode coatings for All-Solid-State-Batteries | |
| Dong Won Jeon and Sung Beom Cho* (Ajou University) | ||
|
S5-P2 - Basic Science and Traditional Ceramics
|
|
||||
|
S5-P2-1 P00089 |
Fabrication of Tantalum Oxide Thin Films by Electron Beam-Induced Deposition | |
| Ayumu Tsuji, Shunsuke Kato, Hagane Ogasawara, and Tomoharu Tokunaga (Nagoya-University), Takahisa Yamamoto and Shunsuke Kobayashi* (Nagoya-University, Japan Fine Ceramics Center) | ||
|
S5-P2-2 P00070 |
Plasma-Assisted Electron Beam-Induced Deposition of Low-Carbon Tungsten Oxide Films | |
| Shunsuke Kato, Ayumu Tsuji, Hagane Ogasawara, and Tomoharu Tokunaga (Nagoya University), Takahisa Yamamoto and Shunsuke Kobayashi* (JFCC,Nagoya University) | ||
|
S5-P2-3 P00254 |
Microstructural Evolution of Spherical Amorphous Silica via Cold Sintering Process | |
| Shiori Nawa, Yeongjun Seo, and Yoshifumi Kondo (The University of Osaka), Tomoyo Goto (Nara Institute of Science and Technology), Tohru Sekino* (The University of Osaka) | ||
|
S5-P2-4 P00205 |
Production of high-purity sodium silicate from Red mud via hydrochloric acid leaching of iron impurity | |
| JaeHwan Pee* and Jang-Won Seo (KICET), Gye-Seok Ahn (Kyonggi University) | ||
|
S5-P2-5 P00204 |
Effect of Fumed Silica Content on the Microstructural and Mechanical Properties of Metakaolin-Based Geopolymer Composites | |
| Shinwoo Kang and Hyunseok Ko* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S5-P2-6 P00203 |
Electrical and Microstructural Properties of Solid Electrolyte Thin Film via Aerosol Deposition Method | |
| Jun Woo Lee, Yun Chan Hwang, Weon Ho Shin, and Jong-Min Oh* (Kwangwoon University) | ||
|
S5-P2-7 P00200 |
Numerical Analysis and Optimization of Horizontal MOCVD Reactor Design Parameters for High-Uniformity GaN Thin Films | |
| Ha-Neul Kim and Hyunseok Ko* (Korea Institute of Ceramic Engineering and Technology) | ||
|
S5-P2-8 P00076 |
Production of clays for white porcelains from porcelain stone using eco-friendly iron impurity leaching with citric acid | |
| JaeHwan Pee*, Hiroaki Katsuki, and Jin-Ho Kim (KICET), Masahiro Kugishima and Nobuaki Kamochi (Saga Ceramics Research Laboratory), Sridhar Komarneni (The Pennsylvania State University) | ||
|
S5-P2-9 P00226 |
Fabrication of Ti3SiC2 Electrode Films by Aerosol Deposition for Application in MIM Capacitor Structure | |
| Hyeong Seok Oh, Jun Woo Lee, Jwa-Bin Jeon, Weon Ho Shin, and Jong-Min Oh* (Kwangwoon University) | ||
|
S5-P2-10 P00073 |
Effect of La2O3 and Ta2O5 Additives on the Structure and Dielectric Properties of Anti-ferroelectric AgNbO3 | |
| Jae-Young Sim (Gyeongsang National University), Geon-Hee Kim (Gyeongsang National Univeristy), Kyoung-Seok Moon* (Gyeongsang National University) | ||
|
S5-P2-11 P00048 |
Structures and Dielectric Properties of the TiO₂‐excess (Ba,Ca)TiO₃ Solid Solution System | |
| Cheol Jeong and Kyoung-Seok Moon* (Gyeongsang National University) | ||
|
S5-P2-12 P00211 |
Performance evaluation of SiOx as an anode material for lithium-ion batteries | |
| Yun Chan Hwang and Weon Ho Shin* (Kwangwoon University) | ||
|
S6-O1-A - Special symposium: Academy of Ceramic R&D Experts
|
|
||||
|
S6-O1-A-1 P00280 (15:00 - 15:15) |
Compositional Engineering of Thermo-Optic Coefficient in Selenide Glasses for Use as Thermal-Imaging Lenses | |
| Il Jung Yoon and Yong Gyu Choi* (Korea Aerospace University) | ||
|
S6-O1-A-2 P00059 (15:20 - 15:35) |
pH-Dependent Adsorption and Crystallinity Variation of CeO2 Shells on Fe3O4@ CeO2 Core–Shell Nanoparticles | |
| Su Ah Han, Ho Hyun Won, and Gye Seok An* (Kyonggi University) | ||
|
S6-O1-A-3 P00190 (15:40 - 15:55) |
Fabrication and Characterization of Lead-Free BiFeO3-BaTiO3 Ceramics via Tape-Casting Process | |
| Hongwoo Park, Jae-Jun Heo, Muhammad Aamir, and Soonil Lee* (Changwon National University) | ||
|
S6-O1-A-4 P00166 (16:00 - 16:15) |
Compositional Effect of Structural Properties of Borosilicate Glass for Pharmaceutical Packaging | |
| YunGi Kim and Woon Jin Chung* (Kongju National University) | ||
|
S6-O1-B - Special symposium: Academy of Ceramic R&D Experts
|
|
||||
|
S6-O1-B-5 P00192 (16:30 - 16:45) |
Lattice Engineering for Controlling Microwave Dielectric Properties in CaSm1-xMxAlO4 (M = Y, La) Ceramics | |
| Mingyu Kim, Jung Hyun Lee, and Hyo Tae Kim (Changwon National University), Moonhee Choi (Korea Institute of Ceramic Engineering and Technology), Dong-Hun Yeo (Icheon Branch of Korea Institute of Ceramic Engineering and Technology), Soonil Lee* (Changwon National University) | ||
|
S6-O1-B-6 P00106 (16:50 - 17:05) |
Gadolinium-alloyed Cesium Cerium Chloride Nanocrystals for Efficient Ultraviolet Photodetector Applications | |
| Jeong Wan Min* (Hanyang University) | ||
|
S6-O1-B-7 P00105 (17:10 - 17:25) |
Binder-Free Processing Enabled by Solvent-Tuned Plasticity in a Lead-Free Manganese Halide | |
| Joo Hyeong Han and Won Bin Im* (Hanyang University) | ||
|
S6-O1-B-1 P00346 (17:30 - 17:45) |
Synthesis of High-Thermal-Conductivity Boron Arsenide Powders for Practical Applications | |
| Bona Lee and Sangwoo Ryu* (Kyonggi University) | ||
|
S6-P1 - Special symposium: Academy of Ceramic R&D Experts
|
|
||||
|
S6-P1-1 P00140 |
Water-Responsive Photon Upconversion from Lead-Free 0D Metal Halides for Detection and Encryption Applications | |
| San Ha Choi, Joo Hyeong Han, and Won Bin Im* (Hanyang University) | ||
|
S6-P1-2 P00123 |
Mechanochemical Engineering of Cs3LnCl6 Metal Halides: From Scalable Synthesis to Radioluminescent Performance | |
| Tae Hyun Park, Won Bin Im*, and Joo Hyeong Han (Hanyang University) | ||
|
S6-P1-3 P00097 |
Amino- and Carboxyl-Modified γ-Fe2O3 Nanoparticles for Nitrilotriacetic Acid Conjugation | |
| Se Hyun Kyung, Ho Hyun Won, and Gye Seok An* (Kyonggi University) | ||
|
S6-P1-4 P00096 |
Surface Modification Base for the Introduction of Anionic Functional groups Fe3O4@SnO2 Nanocomposite Manufacturing and Characterization | |
| Ho Hyun Won, Su Ah Han, and Gye Seok An* (Kyonggi University) | ||
|
S6-P1-5 P00082 |
Silver-Decorated Fe₃O₄ Core–Shell Nanoparticles: Surface Properties and Self-Assembly Approach | |
| Jeong Min Lee (Kyonggi University), Se Hyun Kyung and Gye Seok An* (University) | ||
|
S6-P1-6 P00060 |
Surface-Functionalized Magnetic Core–Shell Nanoparticles for Efficient Plasmid DNA Isolation | |
| Su Ah Han, Jeong Min Lee, and Gye Seok An* (Kyonggi University) | ||
|
S6-P2 - Special symposium: Academy of Ceramic R&D Experts
|
|
||||
|
S6-P2-1 P00221 |
Engineering oxygen vacancies for enhanced electrochemical performance of MnO2/graphene micro-supercapacitor electrodes | |
| Sungmin Wi (Hanyang University), Young-woo Lee (Soonchunhyang University), Won Bin Im* (Hanyang University) | ||
|
S6-P2-2 P00217 |
Dual-Layer HIL Strategy with V₂O₅/PEDOT:PSS for Enhanced Charge Balance and Electron Leakage Suppression in QLEDs | |
| HwaPyeong Park and Won Bin Im* (Hanyang University) | ||
|
S6-P2-3 P00212 |
Sustainable Synthesis of Nanorod Li2MoO4 Anode Material via Water Vapor-Assisted Solid-State Reaction for High-Performance Lithium-Ion Batteries | |
| Gyuheon Kim, Sukju Kim, and Won Bin Im* (Hanyang university) | ||
|
S6-P2-4 P00210 |
Electrolyte Additive Concentration Control for Dendrite-Free and Robust Lithium Metal Anode | |
| Yong Min Park and Won Bin Im* (Hanyang university) | ||
|
S6-P2-5 P00209 |
Effect of local distortions on emission color control in lead-free zero-dimensional metal halide nanocrystals | |
| San Ha Choi, Tuhin Samanta, and Won Bin Im* (Hanyang University) | ||
|
S6-P2-6 P00143 |
Enhanced charge balance in QLEDs via Phosphotungstic–Phosphomolybdic Acid Solid-Solution Hole Injection Layers | |
| HwaPyeong Park, Jeong Wan Min, and Won Bin Im* (Hanyang University) | ||